thanks man
-
96 Ford Probe GT TURBO : 12.2@118
94 Mazda MX6 N/A : 13.7@98
88 Mazda MX6 GT TURBO : 14.2@92
94 Mazda 323 hatch V6 TURBO : To be announced
-
I mounted the AVC-R boost controler today. I used a spare piece of interior I had. It was the panle that the hood poper is mounted to. After cutting and shapping the piece to fit I took the back off the AVC-R and screwed it to the piece I made. I but the front back on e AVC-R mounted the unit in the center console. I like how it turned out. It matches the interior and it cost zero dollars. I also added another fan because the car needed two fans. But I bought too big of a fan lol as seen in the pic. I returned it and it now have 2 12" fans .
96 Ford Probe GT TURBO : 12.2@118
94 Mazda MX6 N/A : 13.7@98
88 Mazda MX6 GT TURBO : 14.2@92
94 Mazda 323 hatch V6 TURBO : To be announced
Comment
-
So after e new fan was installed and installed the in line water neck the car still got to hot to drive. After some inspection turns out there was milky looking oil in the pan and oil cap. I can't believe this happened again. I don't get it. So I went to the junkyard and pulled a 2001 milinea motor that was super clean and the oil looked perfect. I'm taking the klg4 out and swapping this one in. If this doesn't work I'm building the klg4 block. If this motor works and the car doesn't over heat I'm going to change the klg4 hg and keep it as a spare. Look how clean this motor is I picked up its crazy clean!!.
96 Ford Probe GT TURBO : 12.2@118
94 Mazda MX6 N/A : 13.7@98
88 Mazda MX6 GT TURBO : 14.2@92
94 Mazda 323 hatch V6 TURBO : To be announced
Comment
-
^ that is pretty damn clean. specially for a JY motor! nice pull
---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
Comment
-
Motor is installed and I drove the car 35 miles without any issues
going to get it tuned and track ready now !
96 Ford Probe GT TURBO : 12.2@118
94 Mazda MX6 N/A : 13.7@98
88 Mazda MX6 GT TURBO : 14.2@92
94 Mazda 323 hatch V6 TURBO : To be announced
Comment
-
Sick!!!-Jack
ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/
91 626 LX - basically stock and pretty slow still
http://www.clubprotege.com/forum/sho...my-GD-626-LX-)
01 E53 3.0i - FOR SALE!
pm if interested
91 USDM Protege LX - SOLD! turbo/manifold up for sale!
http://www.clubprotege.com/forum/showthread.php?t=46606Comment
-
Can't wait to see this thing!
Sent from my iPhone using TapatalkMy car is a Vazondissan. Part Nissan. Part Mazda. Part Ford. Part VW. Part Honda.
1993 Protege - DX with LX upgrades. Still rockin' the SOHC. Custom HID headlight Retrofit.
2009 Mazda 3 - Finacee Car. No power nothing. About to trade in for a 2014 Mazda 6 Sport.
Install Shifter Bushings: http://www.wihandyman.com/forum/show...491#post646491
Custom HID's: http://www.wihandyman.com/forum/show...&highlight=hidComment
-
You have quite the luck. Hope this one works out91 protege gt. dropzone mx3 springs, mx3 crossmember, ractive front and rear strut braces, rear lower mx3 brace, 4 wheel disc brakes, corksport ss brake and clutch lines,kvr front pads, ractive cai,ram air hood scoop, modified front bumper, shaved ant and rear trunk lock, fubu ant, short shifter, corksport bronzeoil shifter bushings,92 glass sunroof and tail lights, mx3 center console, autometer gauges (volt and oil pressure) cluster needles painted to match, sound system, 17 inch eagle alloy 193 with 205 40 17 rubber. klze is ALIVE BABY!! . http://www.cardomain.com/ride/2394656http://www.toprotege.com/forums/show...hlight=project[url]Comment
-
Whats the update on this build?Comment
-
Never got it all together. Parted out the car. Still have the turbo kit, coils, ms , and rear hatch spoiler. Few bushings and steel brake lines. Car went to the junkyard yesterday. New ride is a 97 sc400 v8 on boost
96 Ford Probe GT TURBO : 12.2@118
94 Mazda MX6 N/A : 13.7@98
88 Mazda MX6 GT TURBO : 14.2@92
94 Mazda 323 hatch V6 TURBO : To be announced
Comment
-
Why didnt it get done? Why the part out?1991 Mazda 323 "Sh1tbox" BP Swap, Beater
1991 Mazda 323 "Sh1tbox v3.23" KL Swap
1993 Mazda Protege DX "Baby Hauler"Comment
-
I moved and had no place to work on the car. Kept getting crappy junkyard motors and after the 3rd or 4th swap I got tired of doing it. It seemed to me I was putting more and more money into a car I only built to race one person in SC at the last flirtle meet I went to. After he saw the car and never showed I was kinda done with it. Car sat in my buddies yard for 2 years. He needed room for his new boat so I took all the goodies out and junked the car.Originally posted by carkrazy1987 View Post
And now that I have this, I really didn't need the 323 anymore. This has 489 whp and is really fun to drive and race it. Nothing beats the sound of a boosted V8!!!
96 Ford Probe GT TURBO : 12.2@118
94 Mazda MX6 N/A : 13.7@98
88 Mazda MX6 GT TURBO : 14.2@92
94 Mazda 323 hatch V6 TURBO : To be announced
Comment
Comment