Page 1 of 2 12 LastLast
Results 1 to 15 of 21

Thread: Mazda 1.8 BP and 2.0 FSDE Parts -Turbo and N/A VVT Head etc

  1. #1
    Registered User
    Join Date
    Jun 2005
    Location
    Brampton
    Posts
    551
    Feedback Score
    0

    Mazda 1.8 BP and 2.0 FSDE Parts -Turbo and N/A VVT Head etc

    for sale:

    clearing out some random items from my current/previous builds.

    1. VVT Miata 1.8 BP Cylinder Head

    Fits on any 1.8 BP bottom end. The best BP cylinder head you can get. Great port design/cams/flow compared to earlier BP heads. N/A or turbo, you want this head!

    Purchased from a wrecker in the states years ago.

    Comes with complete valvetrain assembly, valve cover, cams, ignition coils, and anodized blue protege oil cap.

    Should be rebuilt has been sitting on a shelf for years, needs a good cleaning/rebuild. Had dust/debris when I received it. Cleaned it a bit but I do not have the tools/resources to properly rebuild.

    The cylinder head itself is in fine shape from what i understand the valve train should be cleaned/rebuilt.

    I paid $350 with shipping, plus $80 for the valve cover and $25 for the oil cap.

    asking $250 obo

    2. MazdaSpeed Protege Exhaust Manifold cover

    I have done a rough sanding of this. Also cut so that it can be removed without removing o2 sensor. Says "MazdaSpeed" on it.

    $40

    3. 3rd gen protege / protege5 steering wheel mounted gauge pod

    $50 obo

    4. RX-7 460cc injectors - bought these as a spare set but ended up going 550s.

    They plug and play in the BP rail should be cleaned and inspected like any used injector should. Great for running boost/nitrous.

    $80

    5. 230cc BP injectors - stock EGT injectors in working condition. should be cleaned and inspected like any used injector should.

    $10

    6. Cast EGT exhaust manifold.

    Not cracked. Not the tubular manifold, its from a 91.

    7. Suzuki GSXR injectors (from a 750cc bike, i think the injectors are rated around 200-220cc)

    $10

    8. Forge MotorSport Blow Off Valve!

    Works with stock/aftermarket msp piping. Can be used on any turbo system. Currently has the medium spring installed to prevent stalling on a draw thru MAF setup. Can get more blow off sound by putting in a softer spring, but may cause stalling with a draw thru setup and the softer spring.

    If you relocate the MAF you can run the softest spring without issue and get great bov sound. with the medium spring its more blow off/turkey sound.


    -$50


    9. Saab T25 turbo

    From a 90s Saab. Good for 240HP. Has a cool turbine outlet that is circular. Oil/Water cooled. In rough shape. Needs a ebay rebuild kit (they are cheap) and some loving.

    Would be an awsome item for making art if you dont wanna rebuild it.

    Asking $25.

    I have proper anodized blue AN oil inlet fitting and SS braided drain line for another $40.


    10. Mazda 323 GTR Flywheel

    From an AWD Mazda 323 GTR.


    -$25



    If you have been in the club for a while then odds are you know someone who has bought/sold with me before so buy with confidence.

    PM Me if you are interested in an item.

    May add a few more items later.

    Pics will be up in a few days.
    Im still unpacking everything from my recent move. Pickup in Milton/Oakville/Brampton.

    You can look any part over no hassles before purchase if you are local.

    As for shipping items, I will need paypal or EMT for the item and EMT only for the shipping. I will ship with anyone you want that is within a twenty minute drive of me, but I need EMT for shipping as I cant front shipping costs on large/heavy items.












    Thanks, Jeff
    Last edited by vtec-this; 08-25-2013 at 10:58 PM.
    Jeff MSP ~ 2003 MazdaSpeed Protege ~

  2. #2
    E-Throttle=garbage 300zxrb26dett's Avatar
    Join Date
    May 2008
    Location
    Phoenix
    Posts
    2,355
    Feedback Score
    15 (100%)
    PM sent!
    95 Escort LX, had a rebuilt BP, soon to have 2.5L MZR power
    94 Escort Wagon, Stock DD. Future F2T transplant candidate.
    92 Mazda MX3 GS, KLDE swap
    01 Mazda Millenia, stock
    http://www.clubprotege.com/forum/showthread.php?54757-300zx-s-ELL-work-log
    Denso Injector rebuild kits available
    BP parts for sale
    "Hold yourself accountable before you are held accountable"

  3. #3
    Registered User
    Join Date
    Jun 2005
    Location
    Brampton
    Posts
    551
    Feedback Score
    0
    pm reply. and for anyone else wondering, no I currently do not have the oil hard line or VVT solenoid, however I do have the VVT Cam/Gear included.
    Jeff MSP ~ 2003 MazdaSpeed Protege ~

  4. #4
    Dirt Squirrel DuRWooD's Avatar
    Join Date
    May 2010
    Location
    Belleville, Ontario
    Posts
    1,931
    Feedback Score
    7 (100%)
    Hmm. That cylinder head certainly intrigues me. How available are turbo grind cams? I did a quick search, and found nothing currently available.

    1992 Familia GT-X
    1988 323 GTX


  5. #5
    E-Throttle=garbage 300zxrb26dett's Avatar
    Join Date
    May 2008
    Location
    Phoenix
    Posts
    2,355
    Feedback Score
    15 (100%)
    From my research there is nothing except N/A grinds and then only the most expensive ones. Maruha and Tomei
    95 Escort LX, had a rebuilt BP, soon to have 2.5L MZR power
    94 Escort Wagon, Stock DD. Future F2T transplant candidate.
    92 Mazda MX3 GS, KLDE swap
    01 Mazda Millenia, stock
    http://www.clubprotege.com/forum/showthread.php?54757-300zx-s-ELL-work-log
    Denso Injector rebuild kits available
    BP parts for sale
    "Hold yourself accountable before you are held accountable"

  6. #6
    Spends $$$ on Escorts ;)
    Join Date
    Jun 2009
    Location
    Arvada, CO
    Posts
    1,774
    Feedback Score
    22 (100%)
    Hey, I want that bp4w intake manifold flange! I'll PM after work, about 2 and a half hours from now...
    95 Escort 5door Hatch 2.5L-N/A

    95 Escort 5door Wagon 1.9L-T

    00 Escort ZX2 S/R- Empty

    98 Contour SVT- 2.5L-N/A

    68 Torino GT Fastback 390ci-N/A

    07 Arrow AX8 Leopard 125cc-N/A

  7. #7
    suspension mods intheworks FE3-323's Avatar
    Join Date
    Aug 2003
    Location
    Madison, Wisconsin
    Posts
    22,211
    Feedback Score
    79 (100%)
    dude........ wheres the pics???
    ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

    1992- project FE3.....




    I pet my dash when I get into the car..."good car"
    he actually has a mazda tree, parts grow on it
    bpt323: what does it make me if i like having sex with my car?
    NAProtege: normal
    NAProtege: ?
    bpt323: woot!!!!


  8. #8
    Familia lover triplezoom's Avatar
    Join Date
    Dec 2010
    Location
    belgium
    Posts
    225
    Feedback Score
    2 (100%)
    +1 for the pix, specially the vvt head !



  9. #9
    Registered User
    Join Date
    Jun 2005
    Location
    Brampton
    Posts
    551
    Feedback Score
    0
    very soon back in town tomorrow night. will also be adding a few items.
    Jeff MSP ~ 2003 MazdaSpeed Protege ~

  10. #10
    Raping the knowledge
    Join Date
    Jun 2007
    Location
    st catharines ontario canada
    Posts
    3,301
    Feedback Score
    19 (100%)
    pm'ed re bov

  11. #11
    Registered User
    Join Date
    Jun 2005
    Location
    Brampton
    Posts
    551
    Feedback Score
    0
    pics coming later tonight pms replied.
    Jeff MSP ~ 2003 MazdaSpeed Protege ~

  12. #12
    suspension mods intheworks FE3-323's Avatar
    Join Date
    Aug 2003
    Location
    Madison, Wisconsin
    Posts
    22,211
    Feedback Score
    79 (100%)
    not so cool man. next time follow the rules.
    ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

    1992- project FE3.....




    I pet my dash when I get into the car..."good car"
    he actually has a mazda tree, parts grow on it
    bpt323: what does it make me if i like having sex with my car?
    NAProtege: normal
    NAProtege: ?
    bpt323: woot!!!!


  13. #13
    Registered User
    Join Date
    Jun 2005
    Location
    Brampton
    Posts
    551
    Feedback Score
    0
    first 2 pics posted more to come tonight
    Last edited by vtec-this; 08-25-2013 at 10:24 PM.
    Jeff MSP ~ 2003 MazdaSpeed Protege ~

  14. #14
    cone destroyer atomicEGT's Avatar
    Join Date
    Mar 2005
    Location
    head wound city, ct
    Posts
    7,340
    Feedback Score
    26 (100%)
    the **** is that first picture supposed to be of?

    1995 Ford Escort wagon: GTR + HY35 + 2.5bar
    2001 Ford Escort ZX2: bolt-ons + suspension
    1992 Nissan 240SX: TURBOOOOOOOOOO

  15. #15
    Registered User
    Join Date
    Jun 2005
    Location
    Brampton
    Posts
    551
    Feedback Score
    0
    sold the mk2 miata flange locally today. removed a few items and added a few items. more pics coming tomorrow.
    Jeff MSP ~ 2003 MazdaSpeed Protege ~

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BP4W and VVT head AWD/FWD Intake Manifolds
    By Iantboyd in forum Forced Induction/Nitrous
    Replies: 41
    Last Post: 06-24-2014, 12:35 PM
  2. WTB- VVT miata head complete W/O manifolds.
    By FE3-323 in forum Want To Buy/Trade Items
    Replies: 18
    Last Post: 11-17-2011, 09:48 PM
  3. BPZE head vs a FSDE or FSZE
    By purewhitemp5 in forum Engine/Drivetrain - BG Chassis
    Replies: 14
    Last Post: 01-22-2008, 01:22 PM
  4. need turbo kit 1999 1.5 vvt mazda japan spec
    By island-p5 in forum Forced Induction/Nitrous
    Replies: 17
    Last Post: 02-06-2005, 11:49 PM
  5. need turbo kit 1999 1.5 vvt mazda japan spec
    By island-p5 in forum Suspension/Brakes - BJ Chassis
    Replies: 16
    Last Post: 02-06-2005, 10:33 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •