Announcement

Collapse
No announcement yet.

Mazda 1.8 BP and 2.0 FSDE Parts -Turbo and N/A VVT Head etc

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Mazda 1.8 BP and 2.0 FSDE Parts -Turbo and N/A VVT Head etc

    for sale:

    clearing out some random items from my current/previous builds.

    1. VVT Miata 1.8 BP Cylinder Head

    Fits on any 1.8 BP bottom end. The best BP cylinder head you can get. Great port design/cams/flow compared to earlier BP heads. N/A or turbo, you want this head!

    Purchased from a wrecker in the states years ago.

    Comes with complete valvetrain assembly, valve cover, cams, ignition coils, and anodized blue protege oil cap.

    Should be rebuilt has been sitting on a shelf for years, needs a good cleaning/rebuild. Had dust/debris when I received it. Cleaned it a bit but I do not have the tools/resources to properly rebuild.

    The cylinder head itself is in fine shape from what i understand the valve train should be cleaned/rebuilt.

    I paid $350 with shipping, plus $80 for the valve cover and $25 for the oil cap.

    asking $250 obo

    2. MazdaSpeed Protege Exhaust Manifold cover

    I have done a rough sanding of this. Also cut so that it can be removed without removing o2 sensor. Says "MazdaSpeed" on it.

    $40

    3. 3rd gen protege / protege5 steering wheel mounted gauge pod

    $50 obo

    4. RX-7 460cc injectors - bought these as a spare set but ended up going 550s.

    They plug and play in the BP rail should be cleaned and inspected like any used injector should. Great for running boost/nitrous.

    $80

    5. 230cc BP injectors - stock EGT injectors in working condition. should be cleaned and inspected like any used injector should.

    $10

    6. Cast EGT exhaust manifold.

    Not cracked. Not the tubular manifold, its from a 91.

    7. Suzuki GSXR injectors (from a 750cc bike, i think the injectors are rated around 200-220cc)

    $10

    8. Forge MotorSport Blow Off Valve!

    Works with stock/aftermarket msp piping. Can be used on any turbo system. Currently has the medium spring installed to prevent stalling on a draw thru MAF setup. Can get more blow off sound by putting in a softer spring, but may cause stalling with a draw thru setup and the softer spring.

    If you relocate the MAF you can run the softest spring without issue and get great bov sound. with the medium spring its more blow off/turkey sound.


    -$50


    9. Saab T25 turbo

    From a 90s Saab. Good for 240HP. Has a cool turbine outlet that is circular. Oil/Water cooled. In rough shape. Needs a ebay rebuild kit (they are cheap) and some loving.

    Would be an awsome item for making art if you dont wanna rebuild it.

    Asking $25.

    I have proper anodized blue AN oil inlet fitting and SS braided drain line for another $40.


    10. Mazda 323 GTR Flywheel

    From an AWD Mazda 323 GTR.


    -$25



    If you have been in the club for a while then odds are you know someone who has bought/sold with me before so buy with confidence.

    PM Me if you are interested in an item.

    May add a few more items later.

    Pics will be up in a few days.
    Im still unpacking everything from my recent move. Pickup in Milton/Oakville/Brampton.

    You can look any part over no hassles before purchase if you are local.

    As for shipping items, I will need paypal or EMT for the item and EMT only for the shipping. I will ship with anyone you want that is within a twenty minute drive of me, but I need EMT for shipping as I cant front shipping costs on large/heavy items.












    Thanks, Jeff
    Last edited by vtec-this; 08-25-2013, 09:58 PM.

    S197 Mustang GT Convertible The New DD. (Ford Racing 3.73/JLT CAI/SCT SF3 Tuner/Ford Racing Exhaust)
    2009 Nissan Rogue SL AWD Maximus Tractionous Wifeymobilious
    Previous ~ 235whp 1.8 BP Powered 2003 MazdaSpeed Protege ~ - Sold

    #2
    PM sent!
    92 Mazda MX3 GS> For sale, $1750 OBO
    94 Escort wagon--BP swap coming, VF10 Turbo, COP, EVO ECU, 03 ZX2 front end conversion
    "Hold yourself accountable before you are held accountable"
    EV14 330cc@3Bar injector kits available.
    EV14 GT500 injector kits available for the BP. 610cc@3Bar.
    EV14 925cc@3Bar injector kits available
    BP Forged H beam rods available now
    KL Forged H beam rods available now
    K8/KF Forged H beam rods awaiting test fit
    FS Forged H beam rods
    awaiting test fit
    F2 Forged H beam rods awaiting test fit
    FE3 Forged H beam rods coming soon
    Mitsubishi 3.8 MIVEC rods coming soon
    Aluminum CAS/Distributor caps
    BP oil jet eliminators
    EV14 fuel rail spacers
    More stuff coming soon.......

    Comment


      #3
      pm reply. and for anyone else wondering, no I currently do not have the oil hard line or VVT solenoid, however I do have the VVT Cam/Gear included.

      S197 Mustang GT Convertible The New DD. (Ford Racing 3.73/JLT CAI/SCT SF3 Tuner/Ford Racing Exhaust)
      2009 Nissan Rogue SL AWD Maximus Tractionous Wifeymobilious
      Previous ~ 235whp 1.8 BP Powered 2003 MazdaSpeed Protege ~ - Sold

      Comment


        #4
        Hmm. That cylinder head certainly intrigues me. How available are turbo grind cams? I did a quick search, and found nothing currently available.
        sigpic
        1992 Familia GT-X
        1988 323 GTX
        2011 F150 Lariat Ecoboost
        2014 Civic Touring

        Comment


          #5
          From my research there is nothing except N/A grinds and then only the most expensive ones. Maruha and Tomei
          92 Mazda MX3 GS> For sale, $1750 OBO
          94 Escort wagon--BP swap coming, VF10 Turbo, COP, EVO ECU, 03 ZX2 front end conversion
          "Hold yourself accountable before you are held accountable"
          EV14 330cc@3Bar injector kits available.
          EV14 GT500 injector kits available for the BP. 610cc@3Bar.
          EV14 925cc@3Bar injector kits available
          BP Forged H beam rods available now
          KL Forged H beam rods available now
          K8/KF Forged H beam rods awaiting test fit
          FS Forged H beam rods
          awaiting test fit
          F2 Forged H beam rods awaiting test fit
          FE3 Forged H beam rods coming soon
          Mitsubishi 3.8 MIVEC rods coming soon
          Aluminum CAS/Distributor caps
          BP oil jet eliminators
          EV14 fuel rail spacers
          More stuff coming soon.......

          Comment


            #6
            Hey, I want that bp4w intake manifold flange! I'll PM after work, about 2 and a half hours from now...
            Current:
            68 Torino GT Fastback
            86 MR2
            91 F150
            94 Escort Wagon BP swap
            99 Escort Wagon BP swap
            00 Miata LS
            08 Arrow AX8
            14 Mazda5

            Comment


              #7
              dude........ wheres the pics???
              ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

              1992- project FE3..... 313 WHP @ 9.3psi




              I pet my dash when I get into the car..."good car"
              he actually has a mazda tree, parts grow on it

              Comment


                #8
                +1 for the pix, specially the vvt head !


                Comment


                  #9
                  very soon back in town tomorrow night. will also be adding a few items.

                  S197 Mustang GT Convertible The New DD. (Ford Racing 3.73/JLT CAI/SCT SF3 Tuner/Ford Racing Exhaust)
                  2009 Nissan Rogue SL AWD Maximus Tractionous Wifeymobilious
                  Previous ~ 235whp 1.8 BP Powered 2003 MazdaSpeed Protege ~ - Sold

                  Comment


                    #10
                    pm'ed re bov


                    Comment


                      #11
                      pics coming later tonight pms replied.

                      S197 Mustang GT Convertible The New DD. (Ford Racing 3.73/JLT CAI/SCT SF3 Tuner/Ford Racing Exhaust)
                      2009 Nissan Rogue SL AWD Maximus Tractionous Wifeymobilious
                      Previous ~ 235whp 1.8 BP Powered 2003 MazdaSpeed Protege ~ - Sold

                      Comment


                        #12
                        not so cool man. next time follow the rules.
                        ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

                        1992- project FE3..... 313 WHP @ 9.3psi




                        I pet my dash when I get into the car..."good car"
                        he actually has a mazda tree, parts grow on it

                        Comment


                          #13
                          first 2 pics posted more to come tonight
                          Last edited by vtec-this; 08-25-2013, 09:24 PM.

                          S197 Mustang GT Convertible The New DD. (Ford Racing 3.73/JLT CAI/SCT SF3 Tuner/Ford Racing Exhaust)
                          2009 Nissan Rogue SL AWD Maximus Tractionous Wifeymobilious
                          Previous ~ 235whp 1.8 BP Powered 2003 MazdaSpeed Protege ~ - Sold

                          Comment


                            #14
                            the **** is that first picture supposed to be of?
                            sigpic

                            03 Accord DX: K24/5MT, peasant-spec old man's car
                            92 240SX: KA/T25, nerd mobile

                            Comment


                              #15
                              sold the mk2 miata flange locally today. removed a few items and added a few items. more pics coming tomorrow.

                              S197 Mustang GT Convertible The New DD. (Ford Racing 3.73/JLT CAI/SCT SF3 Tuner/Ford Racing Exhaust)
                              2009 Nissan Rogue SL AWD Maximus Tractionous Wifeymobilious
                              Previous ~ 235whp 1.8 BP Powered 2003 MazdaSpeed Protege ~ - Sold

                              Comment

                              Working...
                              X