for sale:
clearing out some random items from my current/previous builds.
1. VVT Miata 1.8 BP Cylinder Head
Fits on any 1.8 BP bottom end. The best BP cylinder head you can get. Great port design/cams/flow compared to earlier BP heads. N/A or turbo, you want this head!
Purchased from a wrecker in the states years ago.
Comes with complete valvetrain assembly, valve cover, cams, ignition coils, and anodized blue protege oil cap.
Should be rebuilt has been sitting on a shelf for years, needs a good cleaning/rebuild. Had dust/debris when I received it. Cleaned it a bit but I do not have the tools/resources to properly rebuild.
The cylinder head itself is in fine shape from what i understand the valve train should be cleaned/rebuilt.
I paid $350 with shipping, plus $80 for the valve cover and $25 for the oil cap.
asking $250 obo
2. MazdaSpeed Protege Exhaust Manifold cover
I have done a rough sanding of this. Also cut so that it can be removed without removing o2 sensor. Says "MazdaSpeed" on it.
$40
3. 3rd gen protege / protege5 steering wheel mounted gauge pod
$50 obo
4. RX-7 460cc injectors - bought these as a spare set but ended up going 550s.
They plug and play in the BP rail should be cleaned and inspected like any used injector should. Great for running boost/nitrous.
$80
5. 230cc BP injectors - stock EGT injectors in working condition. should be cleaned and inspected like any used injector should.
$10
6. Cast EGT exhaust manifold.
Not cracked. Not the tubular manifold, its from a 91.
7. Suzuki GSXR injectors (from a 750cc bike, i think the injectors are rated around 200-220cc)
$10
8. Forge MotorSport Blow Off Valve!
Works with stock/aftermarket msp piping. Can be used on any turbo system. Currently has the medium spring installed to prevent stalling on a draw thru MAF setup. Can get more blow off sound by putting in a softer spring, but may cause stalling with a draw thru setup and the softer spring.
If you relocate the MAF you can run the softest spring without issue and get great bov sound. with the medium spring its more blow off/turkey sound.
-$50
9. Saab T25 turbo
From a 90s Saab. Good for 240HP. Has a cool turbine outlet that is circular. Oil/Water cooled. In rough shape. Needs a ebay rebuild kit (they are cheap) and some loving.
Would be an awsome item for making art if you dont wanna rebuild it.
Asking $25.
I have proper anodized blue AN oil inlet fitting and SS braided drain line for another $40.
10. Mazda 323 GTR Flywheel
From an AWD Mazda 323 GTR.
-$25
If you have been in the club for a while then odds are you know someone who has bought/sold with me before so buy with confidence.
PM Me if you are interested in an item.
May add a few more items later.
Pics will be up in a few days.
Im still unpacking everything from my recent move. Pickup in Milton/Oakville/Brampton.
You can look any part over no hassles before purchase if you are local.
As for shipping items, I will need paypal or EMT for the item and EMT only for the shipping. I will ship with anyone you want that is within a twenty minute drive of me, but I need EMT for shipping as I cant front shipping costs on large/heavy items.
Thanks, Jeff
clearing out some random items from my current/previous builds.
1. VVT Miata 1.8 BP Cylinder Head
Fits on any 1.8 BP bottom end. The best BP cylinder head you can get. Great port design/cams/flow compared to earlier BP heads. N/A or turbo, you want this head!
Purchased from a wrecker in the states years ago.
Comes with complete valvetrain assembly, valve cover, cams, ignition coils, and anodized blue protege oil cap.
Should be rebuilt has been sitting on a shelf for years, needs a good cleaning/rebuild. Had dust/debris when I received it. Cleaned it a bit but I do not have the tools/resources to properly rebuild.
The cylinder head itself is in fine shape from what i understand the valve train should be cleaned/rebuilt.
I paid $350 with shipping, plus $80 for the valve cover and $25 for the oil cap.
asking $250 obo
2. MazdaSpeed Protege Exhaust Manifold cover
I have done a rough sanding of this. Also cut so that it can be removed without removing o2 sensor. Says "MazdaSpeed" on it.
$40
3. 3rd gen protege / protege5 steering wheel mounted gauge pod
$50 obo
4. RX-7 460cc injectors - bought these as a spare set but ended up going 550s.
They plug and play in the BP rail should be cleaned and inspected like any used injector should. Great for running boost/nitrous.
$80
5. 230cc BP injectors - stock EGT injectors in working condition. should be cleaned and inspected like any used injector should.
$10
6. Cast EGT exhaust manifold.
Not cracked. Not the tubular manifold, its from a 91.
7. Suzuki GSXR injectors (from a 750cc bike, i think the injectors are rated around 200-220cc)
$10
8. Forge MotorSport Blow Off Valve!
Works with stock/aftermarket msp piping. Can be used on any turbo system. Currently has the medium spring installed to prevent stalling on a draw thru MAF setup. Can get more blow off sound by putting in a softer spring, but may cause stalling with a draw thru setup and the softer spring.
If you relocate the MAF you can run the softest spring without issue and get great bov sound. with the medium spring its more blow off/turkey sound.
-$50
9. Saab T25 turbo
From a 90s Saab. Good for 240HP. Has a cool turbine outlet that is circular. Oil/Water cooled. In rough shape. Needs a ebay rebuild kit (they are cheap) and some loving.
Would be an awsome item for making art if you dont wanna rebuild it.
Asking $25.
I have proper anodized blue AN oil inlet fitting and SS braided drain line for another $40.
10. Mazda 323 GTR Flywheel
From an AWD Mazda 323 GTR.
-$25
If you have been in the club for a while then odds are you know someone who has bought/sold with me before so buy with confidence.
PM Me if you are interested in an item.
May add a few more items later.
Pics will be up in a few days.
Im still unpacking everything from my recent move. Pickup in Milton/Oakville/Brampton.
You can look any part over no hassles before purchase if you are local.
As for shipping items, I will need paypal or EMT for the item and EMT only for the shipping. I will ship with anyone you want that is within a twenty minute drive of me, but I need EMT for shipping as I cant front shipping costs on large/heavy items.
Thanks, Jeff
Comment