She looks like she need some work! I like it!
Announcement
Collapse
No announcement yet.
Proud new P5 owner!!!
Collapse
X
-
^ going to rockford likely this week antonio (in the 323 or steveo's speed6). I have to sort out the brakes before i can make any real adventure with the P5.---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
Comment
-
you still need to come up here and pick up the hatch from my 323. lol. And while you're up here, bring the traction bar for test fitting on a zx2. Also, I still have those bj struts you gave me a long time ago. you interested in having them back so that you don't need to buy a new set? Also, don't wait too much longer to come up here, because my grandpa has been trying to get me to start scraping things that we won't be using so that we have room for new stuff that we will be using. I've been waiting for a couple of my buddies (you included) to come up and pick up stuff I offered them. A few have already shown up and picked stuff up, but I still have 3 or 4 guys coming yet.
Edit: Also, I just found this: http://www.crossoverauto.com/crossov...5qbgv3it3koj95
They seem to have a decent amount of stuff available yet.Last edited by Racerboy; 11-07-2013, 01:16 AM.My family has lots of bg's!
2003 Ford Escort ZX2: Project car/future daily driver. Built Ford Tough (With Mazda Stuff)
1999 Escort ZX2: Daily driver/beater. Going to be replaced by the '03 next summer.
2000 Escort ZX2 S/R: bought wrecked, going to use as parts car
1992 Protege LX: My old race car. Just a wrecked shell right now. Waiting for scrap to go up so that I can get rid of it.
1992 Mazda 323: Race car
1992 Escort Gt: My grandpa's old race car
1994 Escort GT: My grandpa's new race car.
Parts cars; 1993 Escort Gt, 1995 Escort lx
Comment
-
---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
Comment
-
Brody- the traction bars do fit on a ZX2- i've already sold one to a zx2 guy.
and wait a minute brody........... When did i give you BJ struts??? do you have a picture of them?? good chance i could use em front/rear/both?---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
Comment
-
You gave me a front set of bj struts a few years ago to use on my race car, but I then found a set of tokico blues really cheap and didn't need to use the bj ones. At least I think that's what happened. It was a long time ago. lol. I will get some pics of them next time I'm out by my grandpa's. They've been sitting in the back of one of our parts cars for a few years now.My family has lots of bg's!
2003 Ford Escort ZX2: Project car/future daily driver. Built Ford Tough (With Mazda Stuff)
1999 Escort ZX2: Daily driver/beater. Going to be replaced by the '03 next summer.
2000 Escort ZX2 S/R: bought wrecked, going to use as parts car
1992 Protege LX: My old race car. Just a wrecked shell right now. Waiting for scrap to go up so that I can get rid of it.
1992 Mazda 323: Race car
1992 Escort Gt: My grandpa's old race car
1994 Escort GT: My grandpa's new race car.
Parts cars; 1993 Escort Gt, 1995 Escort lx
Comment
-
WICKED!!
Ordered some new LCA's for this beast. have to wait to tear into it but it might need tie rod work too.---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
Comment
-
Originally posted by Racerboy View PostEdit: Also, I just found this: http://www.crossoverauto.com/crossov...5qbgv3it3koj95
They seem to have a decent amount of stuff available yet.
Ryan, I highly recommend that you install one on your car.
See my installation at:
Happy Motoring!Last edited by goldstar; 11-08-2013, 07:09 AM.02 DX Millenium Red - The Penultimate Driving Machine
MP3 Strut Tower Bar kit; Cusco Front Lower Arm Tie Bar
MSP Springs, Struts, Stabilizer Bars, Trailing Links, #3 Engine Mount
Kartboy Stabilizer Bar Bushings; Nyloil Shifter Bushings; Red Line MT-90 Gear Oil
MP3 Shifter, Knob and Aluminum Pedal Set
Suvlights HD Wiring Harness; Osram Night Breaker H4 Bulbs; Exide Edge AGM Battery
Summer: 5Zigen FN01R-C 16 x 7" Wheels; Yoko S.drive 205/45-16s
Winter: Enkei OR52 16 x 7" Wheels; Falken Ziex ZE-912 205/45-16s
Modified OEM Air Intake; Racing Beat Exhaust System; Techna-Fit SS Clutch Line
Denso SKJ16CR-L11 Extended Tip Spark Plugs; Magnecor Wires
Power Slot Front Brake Rotors; Techna-Fit SS Brake Lines; Hawk HPS Pads
Red Line Synthetic Engine Oil; C/S Aluminum Oil Cap
Cyberdyne Digital Gauges: Tach; Ambient Air Temp; Voltmeter
Comment
-
Ryan, I checked to see if I still had them, and I couldn't find them. I have a feeling I might have scrapped them out last time I scrapped out parts....My family has lots of bg's!
2003 Ford Escort ZX2: Project car/future daily driver. Built Ford Tough (With Mazda Stuff)
1999 Escort ZX2: Daily driver/beater. Going to be replaced by the '03 next summer.
2000 Escort ZX2 S/R: bought wrecked, going to use as parts car
1992 Protege LX: My old race car. Just a wrecked shell right now. Waiting for scrap to go up so that I can get rid of it.
1992 Mazda 323: Race car
1992 Escort Gt: My grandpa's old race car
1994 Escort GT: My grandpa's new race car.
Parts cars; 1993 Escort Gt, 1995 Escort lx
Comment
-
Awesome install of the cusco lower-tie bar. (i love mine on my BG & can only imagine i would feel the same improvement on this car)
I'll be building one myself since i have the perfect metal laying around & a welder to do so!!!
on a positive note....
SS brake lines are here
Slotted front brake rotors are here.
got a set of "Dave B rings" for the guage cluster
also ordered up a whole schlew of LED's for the entire car
Apparently i need a new Hazard button tho. the retaining tabs on mine were in really rough shape & it just slid right out. Anyone have a spare??
---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
Comment
-
Left front now has replacement:
LCA
Mazda 6 (2005) front calipers & Slotted rotors(ABT brand)
SS-brake line
new Outer tie rod end
once the rain lets up i'll be doing the front right side.
Also installed my LED dome light...... 132 SMD 5730 LED's can we say holy ****ing bright!!!---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
Comment
-
Originally posted by FE3-323 View PostLeft front now has replacement:
LCA
Mazda 6 (2005) front calipers & Slotted rotors(ABT brand)
SS-brake line
new Outer tie rod end
once the rain lets up i'll be doing the front right side.
Also installed my LED dome light...... 132 SMD 5730 LED's can we say holy ****ing bright!!!1991 Mazda 323 Base (Gretchen)-Build Thread
Sold-1987 Mazda 323 Wagon (Molly)-Build Thread
R.I.P.-1988 Mazda 323 GT (Misty) -Build Thread
Oh Colorado, how beautiful your mountains and awesome your roads!
Comment
-
Pictar update!!! (also new wheel bearings installed)
And... here is the dome light.
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
and the autodim feature....
---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
Comment
Comment