Announcement

Collapse
No announcement yet.

Proud new P5 owner!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    She looks like she need some work! I like it!
    Engine
    Trans
    Power

    Comment


      #32
      Originally posted by FE3-323 View Post
      ^ sounds like its time for a roadtrip up then.
      rosemount? or bethel?
      Rosemount. LMK if you are coming up here

      Comment


        #33
        ^ going to rockford likely this week antonio (in the 323 or steveo's speed6). I have to sort out the brakes before i can make any real adventure with the P5.
        ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

        1992- project FE3..... 313 WHP @ 9.3psi




        I pet my dash when I get into the car..."good car"
        he actually has a mazda tree, parts grow on it

        Comment


          #34
          you still need to come up here and pick up the hatch from my 323. lol. And while you're up here, bring the traction bar for test fitting on a zx2. Also, I still have those bj struts you gave me a long time ago. you interested in having them back so that you don't need to buy a new set? Also, don't wait too much longer to come up here, because my grandpa has been trying to get me to start scraping things that we won't be using so that we have room for new stuff that we will be using. I've been waiting for a couple of my buddies (you included) to come up and pick up stuff I offered them. A few have already shown up and picked stuff up, but I still have 3 or 4 guys coming yet.

          Edit: Also, I just found this: http://www.crossoverauto.com/crossov...5qbgv3it3koj95

          They seem to have a decent amount of stuff available yet.
          Last edited by Racerboy; 11-07-2013, 01:16 AM.
          My family has lots of bg's!
          2003 Ford Escort ZX2: Project car/future daily driver. Built Ford Tough (With Mazda Stuff)
          1999 Escort ZX2: Daily driver/beater. Going to be replaced by the '03 next summer.
          2000 Escort ZX2 S/R: bought wrecked, going to use as parts car
          1992 Protege LX: My old race car. Just a wrecked shell right now. Waiting for scrap to go up so that I can get rid of it.
          1992 Mazda 323: Race car
          1992 Escort Gt: My grandpa's old race car
          1994 Escort GT: My grandpa's new race car.
          Parts cars; 1993 Escort Gt, 1995 Escort lx

          Comment


            #35
            just did this mod***

            Products and Projects related to things I am interested in. Mulitools, Every day carry items, props, games, and other unique projects.


            Can't believe they did something so silly. if you want A/C to pull moisture you can push the button. automatic A/C imho is stupid.
            ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

            1992- project FE3..... 313 WHP @ 9.3psi




            I pet my dash when I get into the car..."good car"
            he actually has a mazda tree, parts grow on it

            Comment


              #36
              Brody- the traction bars do fit on a ZX2- i've already sold one to a zx2 guy.
              and wait a minute brody........... When did i give you BJ struts??? do you have a picture of them?? good chance i could use em front/rear/both?
              ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

              1992- project FE3..... 313 WHP @ 9.3psi




              I pet my dash when I get into the car..."good car"
              he actually has a mazda tree, parts grow on it

              Comment


                #37
                You gave me a front set of bj struts a few years ago to use on my race car, but I then found a set of tokico blues really cheap and didn't need to use the bj ones. At least I think that's what happened. It was a long time ago. lol. I will get some pics of them next time I'm out by my grandpa's. They've been sitting in the back of one of our parts cars for a few years now.
                My family has lots of bg's!
                2003 Ford Escort ZX2: Project car/future daily driver. Built Ford Tough (With Mazda Stuff)
                1999 Escort ZX2: Daily driver/beater. Going to be replaced by the '03 next summer.
                2000 Escort ZX2 S/R: bought wrecked, going to use as parts car
                1992 Protege LX: My old race car. Just a wrecked shell right now. Waiting for scrap to go up so that I can get rid of it.
                1992 Mazda 323: Race car
                1992 Escort Gt: My grandpa's old race car
                1994 Escort GT: My grandpa's new race car.
                Parts cars; 1993 Escort Gt, 1995 Escort lx

                Comment


                  #38
                  WICKED!!

                  Ordered some new LCA's for this beast. have to wait to tear into it but it might need tie rod work too.
                  ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

                  1992- project FE3..... 313 WHP @ 9.3psi




                  I pet my dash when I get into the car..."good car"
                  he actually has a mazda tree, parts grow on it

                  Comment


                    #39
                    Originally posted by Racerboy View Post
                    Edit: Also, I just found this: http://www.crossoverauto.com/crossov...5qbgv3it3koj95

                    They seem to have a decent amount of stuff available yet.
                    Racerboy, on that link you provided I notice that they're selling a Cusco Front Lower Arm Tie Bar. This is the one that I installed on my car providing a noticeable benefit in handling. Best of all it's a lot cheaper than the price I paid.

                    Ryan, I highly recommend that you install one on your car.

                    See my installation at:


                    Happy Motoring!
                    Last edited by goldstar; 11-08-2013, 07:09 AM.
                    02 DX Millenium Red - The Penultimate Driving Machine
                    MP3 Strut Tower Bar kit; Cusco Front Lower Arm Tie Bar
                    MSP Springs, Struts, Stabilizer Bars, Trailing Links, #3 Engine Mount
                    Kartboy Stabilizer Bar Bushings; Nyloil Shifter Bushings; Red Line MT-90 Gear Oil
                    MP3 Shifter, Knob and Aluminum Pedal Set
                    Suvlights HD Wiring Harness; Osram Night Breaker H4 Bulbs; Exide Edge AGM Battery
                    Summer: 5Zigen FN01R-C 16 x 7" Wheels; Yoko S.drive 205/45-16s
                    Winter: Enkei OR52 16 x 7" Wheels; Falken Ziex ZE-912 205/45-16s
                    Modified OEM Air Intake; Racing Beat Exhaust System; Techna-Fit SS Clutch Line
                    Denso SKJ16CR-L11 Extended Tip Spark Plugs; Magnecor Wires
                    Power Slot Front Brake Rotors; Techna-Fit SS Brake Lines; Hawk HPS Pads
                    Red Line Synthetic Engine Oil; C/S Aluminum Oil Cap
                    Cyberdyne Digital Gauges: Tach; Ambient Air Temp; Voltmeter

                    Comment


                      #40
                      Ryan, I checked to see if I still had them, and I couldn't find them. I have a feeling I might have scrapped them out last time I scrapped out parts....
                      My family has lots of bg's!
                      2003 Ford Escort ZX2: Project car/future daily driver. Built Ford Tough (With Mazda Stuff)
                      1999 Escort ZX2: Daily driver/beater. Going to be replaced by the '03 next summer.
                      2000 Escort ZX2 S/R: bought wrecked, going to use as parts car
                      1992 Protege LX: My old race car. Just a wrecked shell right now. Waiting for scrap to go up so that I can get rid of it.
                      1992 Mazda 323: Race car
                      1992 Escort Gt: My grandpa's old race car
                      1994 Escort GT: My grandpa's new race car.
                      Parts cars; 1993 Escort Gt, 1995 Escort lx

                      Comment


                        #41
                        Awesome install of the cusco lower-tie bar. (i love mine on my BG & can only imagine i would feel the same improvement on this car)
                        I'll be building one myself since i have the perfect metal laying around & a welder to do so!!!

                        on a positive note....
                        SS brake lines are here
                        Slotted front brake rotors are here.
                        got a set of "Dave B rings" for the guage cluster
                        also ordered up a whole schlew of LED's for the entire car

                        Apparently i need a new Hazard button tho. the retaining tabs on mine were in really rough shape & it just slid right out. Anyone have a spare??


                        Click image for larger version

Name:	100_6356.jpg
Views:	1
Size:	124.3 KB
ID:	1237926
                        ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

                        1992- project FE3..... 313 WHP @ 9.3psi




                        I pet my dash when I get into the car..."good car"
                        he actually has a mazda tree, parts grow on it

                        Comment


                          #42
                          Left front now has replacement:
                          LCA
                          Mazda 6 (2005) front calipers & Slotted rotors(ABT brand)
                          SS-brake line
                          new Outer tie rod end

                          once the rain lets up i'll be doing the front right side.

                          Also installed my LED dome light...... 132 SMD 5730 LED's can we say holy ****ing bright!!!
                          ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

                          1992- project FE3..... 313 WHP @ 9.3psi




                          I pet my dash when I get into the car..."good car"
                          he actually has a mazda tree, parts grow on it

                          Comment


                            #43
                            Originally posted by FE3-323 View Post
                            Left front now has replacement:
                            LCA
                            Mazda 6 (2005) front calipers & Slotted rotors(ABT brand)
                            SS-brake line
                            new Outer tie rod end

                            once the rain lets up i'll be doing the front right side.

                            Also installed my LED dome light...... 132 SMD 5730 LED's can we say holy ****ing bright!!!
                            Although I hope to see the beast, This would be nice to see as well! Glad your enjoying it. I have always wanted one since I took my friend to buy his back in high school. I taught him to drive stick in it!
                            1991 Mazda 323 Base (Gretchen)-Build Thread
                            Sold-1987 Mazda 323 Wagon (Molly)-Build Thread
                            R.I.P.-1988 Mazda 323 GT (Misty) -Build Thread

                            Oh Colorado, how beautiful your mountains and awesome your roads!

                            Comment


                              #44
                              Pictar update!!! (also new wheel bearings installed)

                              Click image for larger version

Name:	1117130216.jpg
Views:	1
Size:	146.7 KB
ID:	1237937

                              Click image for larger version

Name:	1119130043.jpg
Views:	1
Size:	293.4 KB
ID:	1237938

                              Click image for larger version

Name:	1119130042.jpg
Views:	1
Size:	207.8 KB
ID:	1237939

                              Click image for larger version

Name:	1119130042a.jpg
Views:	1
Size:	218.2 KB
ID:	1237940




                              And... here is the dome light.

                              Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.


                              and the autodim feature....

                              Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
                              ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

                              1992- project FE3..... 313 WHP @ 9.3psi




                              I pet my dash when I get into the car..."good car"
                              he actually has a mazda tree, parts grow on it

                              Comment


                                #45
                                IN FOR TEA!


                                come on ryan MOARRR UPDATES since you have got this I've even come back to the forum to follow it =D. I shoulda bought it when I saw it
                                ZEROLIMIT MOTORSPORTS

                                DAILY:91 Honda Civic Wagon Turbo
                                SOLD:90 323 BPSWAP
                                LOW AND SLOW: 98 NISSAN 200SX
                                THE EMBARASSMENT: 96 CAMRY FULL RICE

                                Comment

                                Working...
                                X