Announcement

Collapse
No announcement yet.

How do I wiring up Toyota coil on plugs on the bpt engine for MSII?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    How do I wiring up Toyota coil on plugs on the bpt engine for MSII?

    I'm currently in the process of wiring up my bpt for the MSII. The challenge I'm currently encountering is the wiring up of the Toyota coil on plugs.


    What I've done so far.

    Install 32 - 1 trigger wheel on crank pulley
    Have crank sensor
    Purchased wire loom from diyautotune.com




    This is where I'm at.

    Trigger wheel installed.


    Toyota COP installed.


    This is a diagram for the loom that i found online.



    Here is my challenge. The Miata write up that I'm using for reference have the ignitor modified so that the COP wiring will fit. This type of ignitor is not on the bpt wiring because the Miata uses coils v/s the dizzy of the bpt.











    Whats my next step from here so that I can complete the Toy COP to wire up to the Megasquirt to be complete?
Working...
X