blackcan

[irm mx6]

hi there
what is this black can near the bellhousing in the 323 b6t
it spitting oil there by the breather the ting under the dissy cap

[azgtx]

Oil catch can or oil air separator. That should drain back into the block on the back of the motor. If it is leaking it likely is plugged up.

[azgtx]

It also could be that the dusty o ring is stuffed.

[irm mx6]

when i change the clutch setup i was testing my car and it fals near the rackl and pinion
sins then it was spraying oil on the firewall but i think the pcv is stuck also im running 20psi on stock internals

[irm mx6]

i think the gtx valve cover comes with 2 breather holes i have only 1 i think i need more

[azgtx]

At 20psi you must be dealing with some serious blowby to push that oil out. You need to have that separator hooked up.

[irm mx6]

ok thanks my friend i have solve the prblm
breather on the oil catch can was dirty and my pcv was stuck
thanks 2 weeks ago i ran 13;66 with that setup and with still 2.45 60ft with traction
but im happy with the car