I put a b6t in my 93 323. So far everything works except for the cel and starting. I'm not getting any fuel or spark. I hear the relay kicking, but still no spark or fuel. I have no idea what I am missing or overlooking. I would greatly appreciate any help/suggestions. Thank you.
Announcement
Collapse
No announcement yet.
Need Help, please!!!!
Collapse
X
-
The list of causes is way too long with that small amount of info.'90 AWD Protege, full GTR drivetrain swap, ~320 whp daily driver, RIP, and
'90 AWD Protege, yet another GTR swap, Open class rallycar with a Toyota GT4 gearbox swap, thus crossing the line between hobby and mental illness. And a Brabus E55 K8, removing all doubt.
http://www.wihandyman.com/forum/vbpi...?do=view&g=110
http://www.cardomain.com/ride/2599486
-
Well, trace the entire ignition system from the plugs on back, and check for volts at the injectors and trace all the way back.
But it could just be a blown fuse. Or bent pins at the ECU. OR incorrect ballast for the injectors or bad grounds or any of a million other things that want to go wrong with an engine swap...'90 AWD Protege, full GTR drivetrain swap, ~320 whp daily driver, RIP, and
'90 AWD Protege, yet another GTR swap, Open class rallycar with a Toyota GT4 gearbox swap, thus crossing the line between hobby and mental illness. And a Brabus E55 K8, removing all doubt.
http://www.wihandyman.com/forum/vbpi...?do=view&g=110
http://www.cardomain.com/ride/2599486
Comment
Comment