Announcement

Collapse
No announcement yet.

Need some help please

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need some help please

    My names Jon and I have a 88 323 hatch, just the normal front wheel drive auto, only has 94xxx. I'm looking on info for wheel selection, I know I want. 4x114.3 , 15 inch. But the backspacing has me baffled, I want the rim even with the edge of fender and I will lower to fit.

    Any info is welcomed and if ya need more info I'll be happy to answer


    Sent from my iPhone using Tapatalk

    #2




    Sent from my iPhone using Tapatalk

    Comment


      #3
      Been searching all day and I can't figure out what offset to choose.. Anyone?


      Sent from my iPhone using Tapatalk

      Comment


        #4
        offset is more of a personal preference. - altho i do believe the BF has a different range of offset from the BG
        hopefully some BF chassis guys can chime in
        ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

        1992- project FE3..... 313 WHP @ 9.3psi




        I pet my dash when I get into the car..."good car"
        he actually has a mazda tree, parts grow on it

        Comment


          #5
          I recommend an offset that is between +40mm to +44mm you will be able to fit a 15x6.5 wheel.

          Comment


            #6
            The best cheap wheel for 323s is the Mitsubishi Lancer OZ Rally edition 5 spokes. They're 15X6.5" and I think 45mm offset. They fit fine, though a tire wider than 195/55 tends to rub when bottomed out.

            Comment

            Working...
            X