Hi there,
I'm in the process of upgrading my 1991 Ford Laser Tx3 fwd turbo BPT running a Stratified MS2 PnP ecu to Toyota Coil on Plugs in wasted spark mode, using the stock BP dizzy
I can only get spark on cylinders 1 and 4, running firmware MS2/Extra 3.4.2
Inside the ECU I have 2 wires from IGN A and B to spare connectors, as well as power and ground in a separate loom
Using the spark test mode in TunerStudio, I can activate cylinders 2 and 3 fine.
Any help would be greatly appreciated
Regards,
Matt
I'm in the process of upgrading my 1991 Ford Laser Tx3 fwd turbo BPT running a Stratified MS2 PnP ecu to Toyota Coil on Plugs in wasted spark mode, using the stock BP dizzy
I can only get spark on cylinders 1 and 4, running firmware MS2/Extra 3.4.2
Inside the ECU I have 2 wires from IGN A and B to spare connectors, as well as power and ground in a separate loom
Using the spark test mode in TunerStudio, I can activate cylinders 2 and 3 fine.
Any help would be greatly appreciated
Regards,
Matt