If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Probably not ... I dont have the $$$ for the tires at the moment .
Plus I need to break in the motor etc . before I go and hammer on it .
I might throw a permit on it for the weekend at least and drive it out to the event . ( weather permitting ) .
I told my cousin about the event, so he might bring his GT-R out , as he is selling it now .
Thought it would be a good place to show the car to people who would appreciate it .. maybe find a buyer .. who knows ??
I have been meaning to call you .. what does your shop charge for alignments ?? I need to have a 4 wheel done . , set the camber up front and rear etc .
Probably not ... I dont have the $$$ for the tires at the moment .
Plus I need to break in the motor etc . before I go and hammer on it .
I might throw a permit on it for the weekend at least and drive it out to the event . ( weather permitting ) .
I told my cousin about the event, so he might bring his GT-R out , as he is selling it now .
Thought it would be a good place to show the car to people who would appreciate it .. maybe find a buyer .. who knows ??
I have been meaning to call you .. what does your shop charge for alignments ?? I need to have a 4 wheel done . , set the camber up front and rear etc .
You have tires on the car now don't you??? lol.. thats good enough to come out and have some fun...
Your cousin might find a buyer at the event.. My gtx got a lot of attention when I would bring it out...
Ya it has tires ;p .. but dont you remeber that they are almost bald ...
It wouldnt pass tech inspection. Plus I really want to make sure that its mechanically sound .
It needs to be driven for awhile before I go and run it hard. and have an alignment done .
So I am hoping for warm, sunny and dry weather this week and coming weekend to break it in.
Ya it has tires ;p .. but dont you remeber that they are almost bald ...
It wouldnt pass tech inspection. Plus I really want to make sure that its mechanically sound .
It needs to be driven for awhile before I go and run it hard. and have an alignment done .
So I am hoping for warm, sunny and dry weather this week and coming weekend to break it in.
If cords aren't showing then they pass tech for autocross... Might not for the street... you have lots of time to get the alignment done... its still 6 days away.. lol...
yep, they're not! I need one just as bad as you do Permin lol. I've adjusted my toe to where it feels ok, but I'm sure it's out quite a bit from all my bushings/parts replacements as well lol.
Hey Rob... I am not sure if it will fit but I have a couple of alternators here for a BF SOHC and a B6T... you are welcome to come by and take a look if it will fit... If it does you can have it... I wont do anything with it.. Worst case I have all the brackets and stuff as well.. it might bolt up..
So I figured out my electrical issues and threw a permit on the car today . Drove it for a few hours and ran it through the gears up and down to set the rings . No issues , no leaks, no fires .. Now I need some more dry days to clean up the body polish and wax it.
Oh and i need to find work to make some money to buy new tires . Then an alignment.
After that it will be ready for it's 1st Auto-X event... Weeeeeeeeeeee.....
Comment