Announcement

Collapse
No announcement yet.

Two go in and one comes out (Operation body swap)

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by Mazda_Powered View Post
    awesome man!!! glad you're happy with the setup! i bet the ewg dump sounds crazy nasty at WOT haha, i'd love to hear it!
    So far anyways.. As it is right now with just the downpipe, the turbo is way louder then the wastegate and BOV combined.


    Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
    HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
    Soon to be powered by a Precision snail on crack...

    Add me on more pictures of my projects can be found there.

    Comment


      For those who were wondering, the zx2 2.5" TruBendz mandrel kit requires no modifications to the over the rear subframe section. For second gen Escorts its a direct fit. I just finished hanging it and will post some pics later.


      Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
      HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
      Soon to be powered by a Precision snail on crack...

      Add me on more pictures of my projects can be found there.

      Comment


        I'll take some better pics tomorrow



        Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
        HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
        Soon to be powered by a Precision snail on crack...

        Add me on more pictures of my projects can be found there.

        Comment


          mmmm tasty
          -Jack

          ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/

          91 626 LX - basically stock and pretty slow still
          http://www.clubprotege.com/forum/sho...my-GD-626-LX-)

          01 E53 3.0i - FOR SALE! pm if interested

          91 USDM Protege LX - SOLD! turbo/manifold up for sale!
          http://www.clubprotege.com/forum/showthread.php?t=46606

          Comment


            Soooo I need to redo my vac lines for the wastegate / boost controller and quit using the nipple on the compressor housing. They don't seem to be working together properly with the wastegate sourcing it's signal from the compressor housing and the boost controller getting it's signal from the intake pipe. No big deal though, I'll probably tee off the boost controller and source the wastegate signal from the tee. Wideband is hooked up and reading between 14.7-15.2 at idle. I've yet to check it while cruising and wot.
            Last edited by jinx; 07-14-2010, 08:00 PM.


            Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
            HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
            Soon to be powered by a Precision snail on crack...

            Add me on more pictures of my projects can be found there.

            Comment


              a crude drawing.

              Please note it
              Attached Files
              ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

              1992- project FE3..... 313 WHP @ 9.3psi




              I pet my dash when I get into the car..."good car"
              he actually has a mazda tree, parts grow on it

              Comment


                ^ no different than I was already pointing out.. The controller doesn't like the solenoid and wastegate having their own signal sources.


                Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
                HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
                Soon to be powered by a Precision snail on crack...

                Add me on more pictures of my projects can be found there.

                Comment


                  Started working on fabbing and routing the dump pipe to the ground.



                  Just an overall shot of the bay.



                  Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
                  HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
                  Soon to be powered by a Precision snail on crack...

                  Add me on more pictures of my projects can be found there.

                  Comment


                    shiny oil caps are shiny lol
                    -Jack

                    ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/

                    91 626 LX - basically stock and pretty slow still
                    http://www.clubprotege.com/forum/sho...my-GD-626-LX-)

                    01 E53 3.0i - FOR SALE! pm if interested

                    91 USDM Protege LX - SOLD! turbo/manifold up for sale!
                    http://www.clubprotege.com/forum/showthread.php?t=46606

                    Comment


                      So how are we looking for later this week?
                      -Steve

                      94' Protege < Worklog<SOLD!
                      VF10 powered!
                      262 Whp & 257 Wtq
                      13.1@107

                      '02 Suzuki Bandit 600s

                      Comment


                        I talked to mike briefly about when he was off and working vs your schedule. Sounds like monday was the best for him? All depends on what I gotta do beforehand. So find out whats best for you two and I'll go from there.


                        Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
                        HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
                        Soon to be powered by a Precision snail on crack...

                        Add me on more pictures of my projects can be found there.

                        Comment


                          Yeah I just talked to him and he was saying monday would be good. he only has to go in really early to do a couple things so sometime later in the day would probably be good.
                          -Steve

                          94' Protege < Worklog<SOLD!
                          VF10 powered!
                          262 Whp & 257 Wtq
                          13.1@107

                          '02 Suzuki Bandit 600s

                          Comment


                            what trouble are you 2 about to get in?
                            ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

                            1992- project FE3..... 313 WHP @ 9.3psi




                            I pet my dash when I get into the car..."good car"
                            he actually has a mazda tree, parts grow on it

                            Comment



                              Heh, nothing.
                              -Steve

                              94' Protege < Worklog<SOLD!
                              VF10 powered!
                              262 Whp & 257 Wtq
                              13.1@107

                              '02 Suzuki Bandit 600s

                              Comment


                                Nothing at all...


                                Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
                                HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
                                Soon to be powered by a Precision snail on crack...

                                Add me on more pictures of my projects can be found there.

                                Comment

                                Working...
                                X