Previous setup (spun a bearing)
'90 Protege LX BP DOHC and Trans.
modified 323 GT halfshaft and stock 323 gt axles
50/50 feramic clutch stock protege pressure plate (local shop makes it for about 75 bucks and it help up great on this setup)
28x12x3 intercooler
sink trap style manifold
t3 super 60 trim off thunderturd turbocoupe
38 mm external wastegate
supra 440's
RX7 VAF
Super AFC 1
4 wire tps for use with afc, and a custom full throttle switch for the stock ecu to read also.
walbro 255 lph fuel pump
hks style BOV..
NA ECU and 6-7 degrees base timing running on 91 pump gas (4800 ft above sea level so 91 is premium here lol)
the car was never dynoed but i would estimate on 11 psi it was making somewhere around 210 -220 whp..
..so here is a pic i took about a week ago.. its been sitting a while being a bit neglected so dont judge
ok so im shooting for my new setup to be...
megasquirt
550cc injectors
clutchnet 3 puck clutch and heavy pressure plate
turbo, im thinkin an ebay 35r.. not sure yet
ported head
1mm oversize SS valves
eagle rods/ wiseco pistons
here are some pics of the headwork i have done so far... this is the first port job i have ever done so let me know what you think..
block honed..
crank polished
here are the piston/rods i was going to use but are now in the for sale section lol..
its stock rods (shotpeened) and miata 9.5 :1 pistons
thats it for now!!!
'90 Protege LX BP DOHC and Trans.
modified 323 GT halfshaft and stock 323 gt axles
50/50 feramic clutch stock protege pressure plate (local shop makes it for about 75 bucks and it help up great on this setup)
28x12x3 intercooler
sink trap style manifold
t3 super 60 trim off thunderturd turbocoupe
38 mm external wastegate
supra 440's
RX7 VAF
Super AFC 1
4 wire tps for use with afc, and a custom full throttle switch for the stock ecu to read also.
walbro 255 lph fuel pump
hks style BOV..
NA ECU and 6-7 degrees base timing running on 91 pump gas (4800 ft above sea level so 91 is premium here lol)
the car was never dynoed but i would estimate on 11 psi it was making somewhere around 210 -220 whp..
..so here is a pic i took about a week ago.. its been sitting a while being a bit neglected so dont judge
ok so im shooting for my new setup to be...
megasquirt
550cc injectors
clutchnet 3 puck clutch and heavy pressure plate
turbo, im thinkin an ebay 35r.. not sure yet
ported head
1mm oversize SS valves
eagle rods/ wiseco pistons
here are some pics of the headwork i have done so far... this is the first port job i have ever done so let me know what you think..
block honed..
crank polished
here are the piston/rods i was going to use but are now in the for sale section lol..
its stock rods (shotpeened) and miata 9.5 :1 pistons
thats it for now!!!
Comment