I got some things a wihle ago but ive been working on doing this for about 2 years now and i owe alot to BPT323 for all the head port work,intake manifold porting and just being a great friend and help with information when needed threw out the years!
6-3-10:
got the car off the blocks and down on the ground after 2 years of not so nice ness
6-4-10:
did some slight repairs to rust since that was starting to take over after sitting.....
The Build:
way more coming but all i could think of right now and i will have pics of all this soon here i have pics of my head block and crank i will post later tonight!
i hope to be running E-85 at 20psi with megasquirt sometime soon but not sure when so this could be quite interesting soon
i have a few pictures as of now and will continue to upload more as the come and work progresses!
any questions on anything let em fly?
6-3-10:
got the car off the blocks and down on the ground after 2 years of not so nice ness
6-4-10:
did some slight repairs to rust since that was starting to take over after sitting.....
The Build:
- Wisco 9:1 Ceramic top/molly skirt pistons
- M-Tuned H beams w/arp studs
- ACL Race bearings
- Arp main studs
- Arp Head studs
- Full Port and polished head(thanks to bpt323)
- Somender Grooves
- Corksport +1mm Stainless Oversize valves
- 460cc Rx7 Injectors
- rx7 Vaf
- Vj-20/vf-10 with a larger 19T wheel (so it ruffly was measured out to be a .60 trim) hybrid
- Gtx Exhaust manifold with 38mm External wastegate
- Eclipse 2nd gen crushed BOV
- front mount ic
- 3"full exhaust w/QLP Electronic Cutout
- greddy profec-b spec2
- AEM Urgo wideband
- Wire tuck of the fusebox and some of the main harness
- walbro255 fuel pump
way more coming but all i could think of right now and i will have pics of all this soon here i have pics of my head block and crank i will post later tonight!
i hope to be running E-85 at 20psi with megasquirt sometime soon but not sure when so this could be quite interesting soon
i have a few pictures as of now and will continue to upload more as the come and work progresses!
any questions on anything let em fly?
Comment