okay so I'm doing the 1.8 BP swap in the MX as you may know, but I'm stuck on a few things:
1. The pipe that runs to the water pump (snakes around the headers)... the larger of the pipes.. that comes from the heater hose return right?
2. Where does the heater hose inlet connect to?
3. There are also 2 lines I do not know how to hook up. 1 is coming off the throttle body (it's the larger hose comimg off the idle air controller, and the other is coming off lthe coolant "block" (underneath the coolant thermosensor that looks to be the same size as the one coming off the IAC).
Just need to know these before I start filling it up with coolant! Thanks everyone!!
1. The pipe that runs to the water pump (snakes around the headers)... the larger of the pipes.. that comes from the heater hose return right?
2. Where does the heater hose inlet connect to?
3. There are also 2 lines I do not know how to hook up. 1 is coming off the throttle body (it's the larger hose comimg off the idle air controller, and the other is coming off lthe coolant "block" (underneath the coolant thermosensor that looks to be the same size as the one coming off the IAC).
Just need to know these before I start filling it up with coolant! Thanks everyone!!
Comment