New clutch

[bruce95fmla]

Yeah, my 323 needs a new clutch. I intend to have them lighten my flywheel though and I want to install a 200mm clutch.

-------------------------------
Hey 323Foreword
Is your flywheel chewed up or do you just need to get it resurfaced.

[323Foreword]

I bought the clutch before dropping the trans. Didn't think it was that bad. Those pics were taken yesterday. I'm having second thoughts on putting that 4 puck on now.

Yeah, my 323 needs a new clutch. I intend to have them lighten my flywheel though and I want to install a 200mm clutch.

-------------------------------
Hey 323Foreword
Is your flywheel chewed up or do you just need to get it resurfaced.

Flywheel is worn 2-3mm in

Mazkid nice Protege how much u get for?

[bruce95fmla]

You can't get your flywheel resurfaced. You should be able to pull it and get it resurfaced.

I have a spare 323/protege F tranny flywheel and a spare G tranny flywheel.

both will be lightened and installed on the next clutch swap.

[Tweeaks]

How will you go about installing both flywheels? Oh n/m you probably mean on the 323 and protege, I took it that you will be installing them both on one car lol.

[lscrx]

How will you go about installing both flywheels? Oh n/m you probably mean on the 323 and protege, I took it that you will be installing them both on one car lol.

Thank you Captain Obvious

[323Foreword]

You can't get your flywheel resurfaced. You should be able to pull it and get it resurfaced.

I have a spare 323/protege F tranny flywheel and a spare G tranny flywheel.

both will be lightened and installed on the next clutch swap.

It's not worth to resurface the flywheel. With the old clutch the car still drove fine. Grapped all the gears drove uphill fine, but punching it in any gear it slipped pretty bad.

I'm picking up another flywheel tomorrow. I wanna see how look this thing lasts.



What kind of clutch are u planning to install on the 323?

[bruce95fmla]

I am tosed up between a exedy and a spec stage 1....