Wiper Relay for 91 323 part # br72 67 740 ?!?!

[schindlert]

So I have a 91 Mazda 323 and the wipers randomly quit working. I first thought it was the motor and replaced it. The wipers still don't work. I checked all the fuses in the cabin fuse box and they were all good. When the key is in the "on" position or while I'm driving if I press the wiper switch down or up to the two different speeds I can hear the relay clicking below my feet. Well I pulled the relay and was wanting to know is there a way to pull it apart to see if a solder point is bad? i pulled the front cover off but the relay itself is inside the little black case. If there is no way to repair it I'm not sure where i could find another one of these relays. I'm stationed in the middle of Oklahoma far far away from OKC. Any help would be appreciated.

[me109]

Yes, it can be repaired if it's a bad solder joint. Can you post pictures of what you find inside when you take the cover off?

[schindlert]

http://imgur.com/a/f4j1q

Above is an album of 4 pictures of the best resolution i could get of the relay. I tried to pull it out of the black canister and it seems stuck. I looked inside and the bigger capacitor looks to be glued to the side of the relay. I hope this might help. If anything what years are compatible with our BG model. I know ford escorts from 90-94 and protege's from 90-94 right? its been a while since i browsed this forum but I'm glad its still alive !

[me109]

91-96 Escort. I think that board is supposed to slide out, but it's been a while since I looked at it. You might try cutting the glue with a knife. Just do it carefully if you try it, so you don't poke the capacitor too hard. That would be unpleasant.

I wouldn't be surprised to find that same relay in any 90s Mazda. Of course that's conjecture, but if I were already in a junkyard I'd check everything.