What did you do to your BG(part 8)

[bogaut]

did you buy that car brody?

[atomicEGT]

**** the S/R, more pics of the Brat?

[Racerboy]

Bo, I haven't picked the car up yet, but I commited to buying it, and the seller told the other people that are interested in it that it's sold, so it's pretty much mine. I'm going to be driving 7.5+ hours tommorow to go and pick it up. It's in Cincinnati, Ohio, a few states away from me, but I couldn't go wrong for the price. And I thank Chris (Turpro) for finding for me. And Atomic, those are craigslist photos, not my own. So I can't get any more pictures of the subaru.

[tym2pla7]

Installed half of my subaru BC coil overs in the escort

[CODY004WD]

^details please^



And, I finally ordered some camber plates for mine. My Cusco plates are bent, and I've been meaning to have a water jet place cut me some 1/4" Mild steel replacements... Instead I found 1/2" Aluminum Billet CNC'd plates. They are for another vehicle, but appear to be very close to BG mounts in size. If it works well enough, I will do a writeup.

[Mikey27]

^details please^



And, I finally ordered some camber plates for mine. My Cusco plates are bent, and I've been meaning to have a water jet place cut me some 1/4" Mild steel replacements... Instead I found 1/2" Aluminum Billet CNC'd plates. They are for another vehicle, but appear to be very close to BG mounts in size. If it works well enough, I will do a writeup.

Not hard. Milled 3mm off per side of the rear knuckles, and lengthened the distance between the holes a touch on the coil over. The fronts are off by about a hole so they got the bottom hole slotted. And I believe they are too wide by 3mm a side, so he added spacers. The upper mounts he would have to explain. I think he took a few pictures of the process.

Sent from my Galaxy Nexus using Tapatalk 2

[CODY004WD]

Yeah. Pics and a write-up would be nice. Part number or model would be good too. I was actually looking at a 2.5rs in the junkyard on Tuesday, the struts looked to be close to BG, but I'm not sure. Didn't test fit.

[tym2pla7]

Yeah. Pics and a write-up would be nice. Part number or model would be good too. I was actually looking at a 2.5rs in the junkyard on Tuesday, the struts looked to be close to BG, but I'm not sure. Didn't test fit.

i will do a right up when i get it all done and in the car im just waiting for one thing that i should be getting tomorrow so ill do a little right up on my build thread so expect something on saturday sunday with pictures

[tym2pla7]

http://www.wihandyman.com/forum/show...racecar-s-life <<<< really fast post ill clean i t up when i have time... if people want me to make a proper how to i can but if only a few people want it i wont but i can give info on it

[atomicEGT]

ZX2 bros, is there a trick to getting the oil filter out without getting oil ****in EVERYWHERE?

[Racerboy]

What I do is bend a piece of tin metal into a sort of chute and put it under the filter, and funnel the oil down into a pan. Still makes a mess, but not as big of one.

[wgnths]

Hey all, I just putting this out there im interested in uprading my front brakes and im looking at my options. I was told by a buddy that has a miata that wilwood makes a kit for the fronts and its reasonably priced, hoping they swap over to our BGs. so I just wanted to see what you guys thought about this.

[atomicEGT]

they will not swap over easily.

[tym2pla7]

Option one 5 lug swap for mx6 then you can run Mazdaspeed 6 brakes
Option two talk to jim pierce motorsports he has a wildwood set up on his EGT that you can copy or by his set up at a price

[DuRWooD]

Next Jim GB?