Polyurethane replacement bushings list.

[MADMIKE]

Pedders Front ArmBushing Kit 40mm?

I searched for Pedders and only found one post related to BGs and Pedders, and it wasn't about bushings. http://www.corksport.com/pedders-fro...m-od-only.html
Anyone tried the Pedder bushings yet?
Planning on ordering a few parts from CorkSport. Any insight would be greatly appreciated.

[Shades]

I just wanted to put this as a bushing/insert reference for later for anyone looking to get inserts for their motor mounts: http://www.wihandyman.com/forum/showthread.php?t=43750.

[MADMIKE]

Pedders LCA bushing Guinea Pig

Well, I'll be the guinea pig for the Pedders then I guess .
Just wanted to order a few things up at once from the same place.

[MATT91GT]

noltec is now owned by whiteline. so all part numbers for noltec bushings now start with a W instead of an N.

[TheOnenOnly]

nice ima look into these in the future

[323Permin]

Shades you posted that link to another thread on Polyurethane engine mounts. I checked it out ... but the rest of the thread is vague ... do you know what part no # 4.1105G they are talking about ??? in this thread. Maybe a manufacture that the part no # belongs to?

http://www.wihandyman.com/forum/showthread.php?t=43750.

I am in the throws of doing my enegine / drive line build and I need some new motor mounts.

[Wilyb]

Quote from Superpro

got this the other day. I guess the prices went up...:

Thank you for your interest in SuperPro products.



The items that you are inquiring about are in stock at the moment.



Item. SPF0952-90K $50

Item SPF0953-80K $47

Item SPF0907K $52

Item SPF2744K $66

Shipping Fee $41.78

Total $256.78



If you would like to place the order please reply back.



The payment can be made through PayPal.com payment to payment@tein.com

[BlackMazdaMx-3]

For the Mx-3 couldnt you just go to the salvage yard and get protege/escort or ZX-2 rear body mounts for the lower controll arms? Just wondering if they bolt on?
They are really eazy to come by in the yards around here.

To make the energy suspension 4.3152 kit work? The front bushings are the same correct? At least thats what I got from the talk about it earlier in the thread.

I currently have the SRD controll arm bushing setup on my car and it binds up regrdless how much lube I put on them. They dont use a sleave like all the new ones do. They bind up so bad you have to push the front of the car down slightly when it has been lifted in the front. Need something different.

[Dimitrios]

Great info, but any help on the BJ chassis? I posted the "other" forum:

http://www.mazdas247.com/forum/showthread.php?123786728-Rear-lateral-links-polyurethane-replacement-bushings

[D323]

Great info, but any help on the BJ chassis? I posted the "other" forum:

http://www.mazdas247.com/forum/showt...ement-bushings

http://www.crossoverauto.com/mp3-9.htm

half way down lists lower control arm bushing replacements. These are the ones I have been eyeballing for my P5.

[Dimitrios]

http://www.crossoverauto.com/mp3-9.htm

half way down lists lower control arm bushing replacements. These are the ones I have been eyeballing for my P5.

I already have the Pedders kit in the front lower control arms (which is what that kit is for - recommended BTW). I'm just interested in replacing the bushings in the Lateral Arms.

I'll have to pull them this weekend and measure.

[lazerbluepro]

How much caster does the superpro LCA rear bushing actually give you. I'm currently at +1.2 degree driver side and 1.3 degree passenger after rotating the strut mounts for the most caster. Are they still available only from tein ?

[Mazda_Powered]

http://www.wihandyman.com/forum/showthread.php?t=26769

should be some info there for you

[steezyjdm69]

anybody know where i can get polyurethane f/r strut mounts?

[Mazda_Powered]

moog is usually poly...but strut mounts? idk....I just know of the camber plates with pillowball mounts.