Announcement

Collapse
No announcement yet.

Rusty rear strut towers.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    pictar?
    ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

    1992- project FE3..... 313 WHP @ 9.3psi




    I pet my dash when I get into the car..."good car"
    he actually has a mazda tree, parts grow on it

    Comment


      #17
      No, but the struts are still out so I can get one tomorrow. It looks like the rust started on the upper mount where water can get trapped between the rubber gasket and the steel plate. I wonder if some kind of plastic insulator could be made to help with that.
      1990 Protege 4WD
      GT-X BP26 swap [AT->MT]|Cup holder cut to fit|Synthetic gear oil|Synthetic brake fluid|Corksport SS brake/clutch lines|Mazdaspeed HV oil pump|GT-X front STB|Corksport type I rear STB|Matching full-size spare wheel|Homebrew Brass shifter bushing|Speed Source brass shifter cable bushings|EDM headlights/corners|FMIC|EDM cabin vents

      1 3 5
      ├┼┤
      2 4 R


      Seeking: Canadian 4WD seatbelts.

      Comment


        #18
        Okay, pictures of the POR-15 coated strut towers are up.

        Today I got both rears assembled and installed. The wheels are on. And that's all I could do. Tomorrow I'll get it off the jackstands and tighten the lugnuts. It's almost there.
        Attached Files
        1990 Protege 4WD
        GT-X BP26 swap [AT->MT]|Cup holder cut to fit|Synthetic gear oil|Synthetic brake fluid|Corksport SS brake/clutch lines|Mazdaspeed HV oil pump|GT-X front STB|Corksport type I rear STB|Matching full-size spare wheel|Homebrew Brass shifter bushing|Speed Source brass shifter cable bushings|EDM headlights/corners|FMIC|EDM cabin vents

        1 3 5
        ├┼┤
        2 4 R


        Seeking: Canadian 4WD seatbelts.

        Comment


          #19
          yup. that'll do. once its dry don't forget to throw some grease on it for extra protection
          ---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---

          1992- project FE3..... 313 WHP @ 9.3psi




          I pet my dash when I get into the car..."good car"
          he actually has a mazda tree, parts grow on it

          Comment


            #20
            I sprayed quite a bit of lithium grease on the tops of the upper mounts. Thanks for the advise. I really hate rust.
            1990 Protege 4WD
            GT-X BP26 swap [AT->MT]|Cup holder cut to fit|Synthetic gear oil|Synthetic brake fluid|Corksport SS brake/clutch lines|Mazdaspeed HV oil pump|GT-X front STB|Corksport type I rear STB|Matching full-size spare wheel|Homebrew Brass shifter bushing|Speed Source brass shifter cable bushings|EDM headlights/corners|FMIC|EDM cabin vents

            1 3 5
            ├┼┤
            2 4 R


            Seeking: Canadian 4WD seatbelts.

            Comment

            Working...
            X