Originally posted by 300zxrb26dett
View Post
Announcement
Collapse
No announcement yet.
To all K-Sport owners
Collapse
This topic is closed.
X
X
-
Originally posted by atomicEGT View PostI might be in for this, just gotta make sure that the sleeves would work with my Fortunes.
Originally posted by XelderX View PostI've got a bunch of GC collars, but I'm not sure if they are the same thread. If we are switching to 2.25" springs then I will need collars for sure.92 Mazda MX3 GS> For sale, $1750 OBO
94 Escort wagon--BP swap coming, VF10 Turbo, COP, EVO ECU, 03 ZX2 front end conversion
"Hold yourself accountable before you are held accountable"
EV14 330cc@3Bar injector kits available.
EV14 GT500 injector kits available for the BP. 610cc@3Bar.
EV14 925cc@3Bar injector kits available
BP Forged H beam rods available now
KL Forged H beam rods available now
K8/KF Forged H beam rods awaiting test fit
FS Forged H beam rods awaiting test fit
F2 Forged H beam rods awaiting test fit
FE3 Forged H beam rods coming soon
Mitsubishi 3.8 MIVEC rods coming soon
Aluminum CAS/Distributor caps
BP oil jet eliminators
EV14 fuel rail spacers
More stuff coming soon.......
Comment
-
To all K-Sport owners
Originally posted by XelderX View PostI'm actually pretty excited about this. If the housings are the same thread size as Ksport housings then they have a swaybar endlink collar that threads on as well.
My current setup uses a FSB attached to the strut so that makes it easy to keep the same design.
The M52x1.5 sleeves will be stainless steel. The M55x2.0 sleeves will be aluminum
Originally posted by concealer404 View PostYeah the more i think about this, the more the MX6 needs something like this. I'm a little bummed out on the whole "not compatible with 2.5" GC setup" thing, but i'll live.
MX6 is destined for OLOA, so a suspension that doesn't suck would be a good thing.Last edited by KAinjection; 12-05-2014, 12:06 PM.92 Mazda MX3 GS> For sale, $1750 OBO
94 Escort wagon--BP swap coming, VF10 Turbo, COP, EVO ECU, 03 ZX2 front end conversion
"Hold yourself accountable before you are held accountable"
EV14 330cc@3Bar injector kits available.
EV14 GT500 injector kits available for the BP. 610cc@3Bar.
EV14 925cc@3Bar injector kits available
BP Forged H beam rods available now
KL Forged H beam rods available now
K8/KF Forged H beam rods awaiting test fit
FS Forged H beam rods awaiting test fit
F2 Forged H beam rods awaiting test fit
FE3 Forged H beam rods coming soon
Mitsubishi 3.8 MIVEC rods coming soon
Aluminum CAS/Distributor caps
BP oil jet eliminators
EV14 fuel rail spacers
More stuff coming soon.......
Comment
-
The swaybar collars are available for other sizes/threads.
Cool beans on the spring size. Doesn't matter a whole lot unless it could use GC collars. But if you're supplying collars, it doesn't matter at all so i was being bummed for no reason.
I definitely want in on this. What exactly do you need from me again for MX6 stuff, again?
Comment
-
Well that depends..... You had mentioned a set of K sports before so I would rather use the mounts from that kit. I am sure it has camber adjustment in the front so it would be easier to just take all the measurements from one already made than try to come up with one from scratch based off a stock mount. If we have to use stock mounts then I could rob them off the mx6 I having sitting here at my house.92 Mazda MX3 GS> For sale, $1750 OBO
94 Escort wagon--BP swap coming, VF10 Turbo, COP, EVO ECU, 03 ZX2 front end conversion
"Hold yourself accountable before you are held accountable"
EV14 330cc@3Bar injector kits available.
EV14 GT500 injector kits available for the BP. 610cc@3Bar.
EV14 925cc@3Bar injector kits available
BP Forged H beam rods available now
KL Forged H beam rods available now
K8/KF Forged H beam rods awaiting test fit
FS Forged H beam rods awaiting test fit
F2 Forged H beam rods awaiting test fit
FE3 Forged H beam rods coming soon
Mitsubishi 3.8 MIVEC rods coming soon
Aluminum CAS/Distributor caps
BP oil jet eliminators
EV14 fuel rail spacers
More stuff coming soon.......
Comment
-
Originally posted by 300zxrb26dett View PostWell that depends..... You had mentioned a set of K sports before so I would rather use the mounts from that kit. I am sure it has camber adjustment in the front so it would be easier to just take all the measurements from one already made than try to come up with one from scratch based off a stock mount. If we have to use stock mounts then I could rob them off the mx6 I having sitting here at my house.
I'm guessing either way, i'd be on my own for the strut mounts?
I'm confused by what we're talking about haha.
I'm thinking you would need the dimensions of the lower strut "ears" that go over the spindles?
Then.... ideal length of whole housing?Last edited by concealer404; 12-05-2014, 02:14 PM.
Comment
-
Sorry I didn't specify what I was talking about earlier😄
I was referring to the upper k sport strut tower mounts, are they the same between 1st and 2nd gen?
I have an 88 MX6 sitting at my house and it's a parts car anyway so I can rob parts off of it and get everything measured for you. I will ultimately have to send the parts to the manufacturer so they can do their own measuring, since my measurements are only for getting a detailed quote.92 Mazda MX3 GS> For sale, $1750 OBO
94 Escort wagon--BP swap coming, VF10 Turbo, COP, EVO ECU, 03 ZX2 front end conversion
"Hold yourself accountable before you are held accountable"
EV14 330cc@3Bar injector kits available.
EV14 GT500 injector kits available for the BP. 610cc@3Bar.
EV14 925cc@3Bar injector kits available
BP Forged H beam rods available now
KL Forged H beam rods available now
K8/KF Forged H beam rods awaiting test fit
FS Forged H beam rods awaiting test fit
F2 Forged H beam rods awaiting test fit
FE3 Forged H beam rods coming soon
Mitsubishi 3.8 MIVEC rods coming soon
Aluminum CAS/Distributor caps
BP oil jet eliminators
EV14 fuel rail spacers
More stuff coming soon.......
Comment
-
They're not the same between 1st and 2nd gen.
What i CAN tell you is that 1st gen MX6 fronts are the same as FC RX7 fronts, but with an 8mm stud instead of the 6mm RX7 stud.
And 1st gen MX6 rears are the same as S13 chassis FRONTS.
KSport does have them for all 4 corners for 1st gen MX6, though. If that helps.
Comment
-
That is all very interesting. I will just measure and use the parts from this car out here in my yard then. Just to make sure, are their any dimensional differences between the electronic suspension cars and the one without? This one has it.92 Mazda MX3 GS> For sale, $1750 OBO
94 Escort wagon--BP swap coming, VF10 Turbo, COP, EVO ECU, 03 ZX2 front end conversion
"Hold yourself accountable before you are held accountable"
EV14 330cc@3Bar injector kits available.
EV14 GT500 injector kits available for the BP. 610cc@3Bar.
EV14 925cc@3Bar injector kits available
BP Forged H beam rods available now
KL Forged H beam rods available now
K8/KF Forged H beam rods awaiting test fit
FS Forged H beam rods awaiting test fit
F2 Forged H beam rods awaiting test fit
FE3 Forged H beam rods coming soon
Mitsubishi 3.8 MIVEC rods coming soon
Aluminum CAS/Distributor caps
BP oil jet eliminators
EV14 fuel rail spacers
More stuff coming soon.......
Comment
-
To all K-Sport owners
Each sleeve will be approx 7mm taller than the insert, so 297mm and 339mm for each one. This comes out to about 1/2" longer than the front k sport shock body and about 1" shorter than the rear K-sport shock body.Last edited by KAinjection; 12-05-2014, 06:47 PM.92 Mazda MX3 GS> For sale, $1750 OBO
94 Escort wagon--BP swap coming, VF10 Turbo, COP, EVO ECU, 03 ZX2 front end conversion
"Hold yourself accountable before you are held accountable"
EV14 330cc@3Bar injector kits available.
EV14 GT500 injector kits available for the BP. 610cc@3Bar.
EV14 925cc@3Bar injector kits available
BP Forged H beam rods available now
KL Forged H beam rods available now
K8/KF Forged H beam rods awaiting test fit
FS Forged H beam rods awaiting test fit
F2 Forged H beam rods awaiting test fit
FE3 Forged H beam rods coming soon
Mitsubishi 3.8 MIVEC rods coming soon
Aluminum CAS/Distributor caps
BP oil jet eliminators
EV14 fuel rail spacers
More stuff coming soon.......
Comment
Comment