Just disassembled and cleaned the EGR valve... again. Damn shaft is always getting stuck. I cleaned it with some throttle body cleaner and PB Blaster. I wanted to try WD-40 for lubricating the shaft this time, but we're all out so I painted the shaft with Never-Seez again. Both inside the housing and on top behind the spring. I'm starting to think it's the section of shaft outside, behind the spring, that gets stuck, not inside where the exhaust gasses flow.
Also cleaned the throttle body and as much of the inside of the intake manifold as I could reach with my hand and a rag.
Also cleaned the throttle body and as much of the inside of the intake manifold as I could reach with my hand and a rag.
Comment