Announcement

Collapse
No announcement yet.

3rd Gear Slip

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    3rd Gear Slip

    Ok this happened this morning.

    I was driving down the highway (still fairly close to home) and my AT shifts into 3rd gear as normal. All the sudden, it doesnt catch the gear, the RPMs shoot up. so i turn on my OD, set the CC to 50 so i can get to school.

    A little bit later on, I try driving it normally again, and it works perfectly. It worked perfectly on the way home again. It has been about 20-25,000 miles since my last AT fluid change....could that have something to do with this or....

    BTW: this is my second transmission. the first one was replaced at 50,000 give or take.

    2000 White Protege LX
    Sumitomo 195/60HR14
    2 x Polk DB570 (5"x7")
    Kenwood KDC-MP522 Head Unit
    Kenwood KAC-7251 (800 W) Amp
    Audiobahn AWC10T x 2 Subs
    Kenwood Music Keg
    Black Widow Keyless Entry
    Intake- Custom SRI
    Clear Corner Lights
    APC Clear Tail Lights

    #2
    no i shift normally and leave it alone. i've replaced one tranny and dont want to do it again.

    2000 White Protege LX
    Sumitomo 195/60HR14
    2 x Polk DB570 (5"x7")
    Kenwood KDC-MP522 Head Unit
    Kenwood KAC-7251 (800 W) Amp
    Audiobahn AWC10T x 2 Subs
    Kenwood Music Keg
    Black Widow Keyless Entry
    Intake- Custom SRI
    Clear Corner Lights
    APC Clear Tail Lights

    Comment


      #3
      i have a 00 lx with around 80k on it. The last time the ECU was flashed (i believe) was when i took it in to have the MAF replaced in '02.

      2000 White Protege LX
      Sumitomo 195/60HR14
      2 x Polk DB570 (5"x7")
      Kenwood KDC-MP522 Head Unit
      Kenwood KAC-7251 (800 W) Amp
      Audiobahn AWC10T x 2 Subs
      Kenwood Music Keg
      Black Widow Keyless Entry
      Intake- Custom SRI
      Clear Corner Lights
      APC Clear Tail Lights

      Comment

      Working...
      X