I feel that I am finally ready to offer injector cleaning services to the members of Clubprotege, after spending some time learning to use the machine and trying different sets of injectors with it. Due to some limitations on my end and limitations of my machine, some things need to be noted:
1: I only have a very small stock of injector service parts, so full service can only be offered on certain injectors, which are anything I already offer kits for.
2: Due to the limitations of my machine, I will not be able to get accurate flow data for injectors of 450cc or larger since the test tubes will overflow. If this happens I will manually stop the machine at 5 sec and calculate the flow instead of the standard 15sec set time the machine uses. This is not accurate due to me not being able to stop the machine in the exact same place every time.
3: No side feed injectors can be currently serviced.
4: I may not have the required adapters to do a back-flush on all injectors
5: Any problems or limitations with my service will be notified by PM or email, and the appropriate action taken. Price adjustment, partial refund etc....
6: Flow bench test will be done 3 times before and 3 times after service. I calculate the average of the 3 runs to determine flow rating due to variables in the machine, fluid, and fluid temperature.
Pricing:
Full injector service pricing will be $14 per injector + $5.50 return shipping.
Injector cleaning only will be $11 per injector + $5.50 return shipping. **No service parts replaced**
A full set of injectors (4+) will include return shipping at no additional cost.
Full injector service pricing for locals will be $13 per injector
Injector cleaning only price for locals will be $10 per injector
Injector service details: ***Full service only
Check coil resistance
External cleaning
Flow bench
Remove Service parts***
Two 20-minute ultrasonic cleaning cycles
*Cycle includes injector held wide open and pulsed
Back flush injector***
Flow bench
Replace serviceable parts***
Bag/number all injectors and old service parts
Before/After results printout
Shipping and payment:
PM me for my shipping and payment information
All injectors should be completely dry of fuel and bagged for shipping.
I recommend using USPS small flat rate boxes for shipping
Please include your return address and screen name in the box so I know who they are for when they arrive.
Payment can be made by paypal once the injectors are ready to be shipped back. I will send a PM when they are ready.
I will send a PM with a tracking number after I receive payment.
Please allow 1-2 business days for injectors to be serviced before expecting a PM for completion of service.
Let me know if there are any other questions you guys may have.
1: I only have a very small stock of injector service parts, so full service can only be offered on certain injectors, which are anything I already offer kits for.
2: Due to the limitations of my machine, I will not be able to get accurate flow data for injectors of 450cc or larger since the test tubes will overflow. If this happens I will manually stop the machine at 5 sec and calculate the flow instead of the standard 15sec set time the machine uses. This is not accurate due to me not being able to stop the machine in the exact same place every time.
3: No side feed injectors can be currently serviced.
4: I may not have the required adapters to do a back-flush on all injectors
5: Any problems or limitations with my service will be notified by PM or email, and the appropriate action taken. Price adjustment, partial refund etc....
6: Flow bench test will be done 3 times before and 3 times after service. I calculate the average of the 3 runs to determine flow rating due to variables in the machine, fluid, and fluid temperature.
Pricing:
Full injector service pricing will be $14 per injector + $5.50 return shipping.
Injector cleaning only will be $11 per injector + $5.50 return shipping. **No service parts replaced**
A full set of injectors (4+) will include return shipping at no additional cost.
Full injector service pricing for locals will be $13 per injector
Injector cleaning only price for locals will be $10 per injector
Injector service details: ***Full service only
Check coil resistance
External cleaning
Flow bench
Remove Service parts***
Two 20-minute ultrasonic cleaning cycles
*Cycle includes injector held wide open and pulsed
Back flush injector***
Flow bench
Replace serviceable parts***
Bag/number all injectors and old service parts
Before/After results printout
Shipping and payment:
PM me for my shipping and payment information
All injectors should be completely dry of fuel and bagged for shipping.
I recommend using USPS small flat rate boxes for shipping
Please include your return address and screen name in the box so I know who they are for when they arrive.
Payment can be made by paypal once the injectors are ready to be shipped back. I will send a PM when they are ready.
I will send a PM with a tracking number after I receive payment.
Please allow 1-2 business days for injectors to be serviced before expecting a PM for completion of service.
Let me know if there are any other questions you guys may have.
Comment