Prices are shipped to the Continental US, and with many of the Items, I am throwing in bonus incentives! Feel free to PM offers on stuff, but If accepted, most likely the incentives wont be included.
PRICES DO NOT INCLUDE PAYPAL FEES. ADD 3% or SEND AS PAYMENT OWED, whichever makes you comfortable. (see/reed my feedback score if you are on the fence)
This Just IN:
Pierce Motorsports Front strut tower bar: $280 shipped
So, you missed the group buy... you really wanted one too. This Chromoly Steel solid design strut tower bar is the best strut tower bar on the market for our cars... The stiffness blows any other competitors product out of the water. I'm willing to sell it for what I payed, which is at a discounted rate from retail, and Include free shipping... (I'm getting another even crazier one built, so this one has to go, now that I have only one BG)
Mine was made with additional clearance in hopes to clear a millenia manifold KL setup, but it does not. It is one of very few that will however clear the 1.9L, which sits taller than any 1.8L intake manifold. This is also one of few that will fit an automatic car, since the brake master sits further out and higher up on an auto. It may clear an f2t or FE3, if you need to know for sure, be prepared to supply some measurements. (I think it should work on a third gen Pro or Pro5 as well, since I've seen their stock pieces on BG's before. Measurements would be needed for intake manifold clearance however.)
I'll get a "proper" photo tomorrow, but I'm sure there is no doubt that this is mine:
Up first: Lighting/Body parts
$400 shipped:
The E36's. You've all seen them, (If not, check out the November ROTM nom/vote threads) Fit Anywhere USDM Pro or 323 headlights fit, (corner mounting and under corner garnish will be a mild DIY since I had escort corners) I had 323 lights on my tracer, and made these fit to replace them. Works for Slant or straight hoods/lights. bonus incentive: 3000k HID in the projectors, with PNP wiring to illuminate Low and bright simultaneously when brights are engaged.
bonus:
$250 shipped:
Bugeye Foglight grille. OEM IPF fog housings with aftermarket clear lenses. Could stand to be stripped and painted. bonus incentive: 1 OEM IPF Yellow Fog, just need to find 1 more and you have switchable clear or yellow options.
SOLD:
Glass EDM's with Leveler motors but no switch. Just picked these up from Bo, with intentions to use them, but time is not going to allow. bonus incentive: 1 spare drivers side EDM corner (same as JDM passenger side piece)
SOLD:
Tracer Wagon Taillights. One crack, not major, but present and accounted for. bonus incentive: You get those sweet all red, swagger style, baller taillights for pretty cheap.
Next Section: BP stuff
SOLD
NA8 Miata Valve cover... 1.8L BP, works on BG BP's with removal of the metal plate behind the cam gears, and NA8 plastics will also work for that finished look (plastics not included)
bonus: arguably the best looking BP valve cover available.
$280 shipped:
323 GTR Rods and Pistons, just bought from 323Permin with intentions to fortify My BP4W, not going to happen with the time crunch, so up for sale (at a loss) bonus incentive: New in Package ARP Rod bolts.
SOLD:
BP26 Manifold, with T3 adapter plate, and ceramic coated. Again, purchased recently, from Georonimo, with hopes of a built BP swap. Going with a KL swap instead for simplicity, so again for sale at a loss. bonus incentive: Mani was port-matched to the T3 adapter plate for ultimate flow!
bonus:
Last section: Piddly Ass odds and ends
SOLD: (whoops, should have kept for new Miata D'oh)
Good condition NB 5-speed Miata Nardi Wood shift Knob. bonus incentive: It's nicely weighted
$40 shipped
Slim fans, 2 of them to be exact. bonus incentive: lifetime blow-job for your radiator for 1 easy payment of $40 (they can be wired to suck or blow, your preference)
MANY MORE ITEMS TO COME IN THE NEXT FEW WEEKS/MONTHS AS I CLEAR OUT UNNECESSARY PARTS FROM ALL THE AREAS I TEND TO STORE THEM. (626 LE Leather Seats, Most of an 89 Probe GT, Various BG parts, tons and tons of 4x100 wheels, KL parts, MX3 parts, Custom parts, 3" exhaust parts, Turbo stuff, EGT skirts, gauges, suspension parts the list goes on and on and on, I'll even throw in some more subtle (or not so,) humor if it is well accepted)
PRICES DO NOT INCLUDE PAYPAL FEES. ADD 3% or SEND AS PAYMENT OWED, whichever makes you comfortable. (see/reed my feedback score if you are on the fence)
This Just IN:
Pierce Motorsports Front strut tower bar: $280 shipped
So, you missed the group buy... you really wanted one too. This Chromoly Steel solid design strut tower bar is the best strut tower bar on the market for our cars... The stiffness blows any other competitors product out of the water. I'm willing to sell it for what I payed, which is at a discounted rate from retail, and Include free shipping... (I'm getting another even crazier one built, so this one has to go, now that I have only one BG)
Mine was made with additional clearance in hopes to clear a millenia manifold KL setup, but it does not. It is one of very few that will however clear the 1.9L, which sits taller than any 1.8L intake manifold. This is also one of few that will fit an automatic car, since the brake master sits further out and higher up on an auto. It may clear an f2t or FE3, if you need to know for sure, be prepared to supply some measurements. (I think it should work on a third gen Pro or Pro5 as well, since I've seen their stock pieces on BG's before. Measurements would be needed for intake manifold clearance however.)
I'll get a "proper" photo tomorrow, but I'm sure there is no doubt that this is mine:
Up first: Lighting/Body parts
$400 shipped:
The E36's. You've all seen them, (If not, check out the November ROTM nom/vote threads) Fit Anywhere USDM Pro or 323 headlights fit, (corner mounting and under corner garnish will be a mild DIY since I had escort corners) I had 323 lights on my tracer, and made these fit to replace them. Works for Slant or straight hoods/lights. bonus incentive: 3000k HID in the projectors, with PNP wiring to illuminate Low and bright simultaneously when brights are engaged.
bonus:
$250 shipped:
Bugeye Foglight grille. OEM IPF fog housings with aftermarket clear lenses. Could stand to be stripped and painted. bonus incentive: 1 OEM IPF Yellow Fog, just need to find 1 more and you have switchable clear or yellow options.
SOLD:
Glass EDM's with Leveler motors but no switch. Just picked these up from Bo, with intentions to use them, but time is not going to allow. bonus incentive: 1 spare drivers side EDM corner (same as JDM passenger side piece)
SOLD:
Tracer Wagon Taillights. One crack, not major, but present and accounted for. bonus incentive: You get those sweet all red, swagger style, baller taillights for pretty cheap.
Next Section: BP stuff
SOLD
NA8 Miata Valve cover... 1.8L BP, works on BG BP's with removal of the metal plate behind the cam gears, and NA8 plastics will also work for that finished look (plastics not included)
bonus: arguably the best looking BP valve cover available.
$280 shipped:
323 GTR Rods and Pistons, just bought from 323Permin with intentions to fortify My BP4W, not going to happen with the time crunch, so up for sale (at a loss) bonus incentive: New in Package ARP Rod bolts.
SOLD:
BP26 Manifold, with T3 adapter plate, and ceramic coated. Again, purchased recently, from Georonimo, with hopes of a built BP swap. Going with a KL swap instead for simplicity, so again for sale at a loss. bonus incentive: Mani was port-matched to the T3 adapter plate for ultimate flow!
bonus:
Last section: Piddly Ass odds and ends
SOLD: (whoops, should have kept for new Miata D'oh)
Good condition NB 5-speed Miata Nardi Wood shift Knob. bonus incentive: It's nicely weighted
$40 shipped
Slim fans, 2 of them to be exact. bonus incentive: lifetime blow-job for your radiator for 1 easy payment of $40 (they can be wired to suck or blow, your preference)
MANY MORE ITEMS TO COME IN THE NEXT FEW WEEKS/MONTHS AS I CLEAR OUT UNNECESSARY PARTS FROM ALL THE AREAS I TEND TO STORE THEM. (626 LE Leather Seats, Most of an 89 Probe GT, Various BG parts, tons and tons of 4x100 wheels, KL parts, MX3 parts, Custom parts, 3" exhaust parts, Turbo stuff, EGT skirts, gauges, suspension parts the list goes on and on and on, I'll even throw in some more subtle (or not so,) humor if it is well accepted)
Comment