Looking to get rid of some things that I've had sitting around forever.
Prices are shipped in the US.
Auto BP Jackshaft. Run this and an auto BP passenger axle on your manual F-series to get rid of the stock extra long axle and have equal length setup like the G-series. Bearing needs replaced. Will include the 3 bolts for mount. $50
MX-3 front LCA's. No bushings installed. $50
OEM BP26 bpv and hoses. Worked fine. SOLD
BP26 turbo inlet pipe. Has the turbo side seal. SOLD
Turbo throttle body coupler. SOLD
Turbo throttle body inlet pipe. SOLD
VF-10 turbo. Bought this many years ago and ended up not doing anything with it. I was going to run it as is with a vj20 hotside. Normal play. Spins free and smooth. Was stored with a bit of oil in the cartridge. No oil/water fittings or wastegate actuator. SOLD
Next is a VJ-20 turbine housing modded by Corksport for their GT28 hybrids they did back in the day. The wastegate hole was also ported and has a VF10 flapper fitted. SOLD
Old school Genie 4-2-1 header. There is a crack between the rear bank of runners. Theres some rust on the 2nd section but its not thin and there are no other leaks. 2.25" ball flange outlet. SOLD
Prices are shipped in the US.
Auto BP Jackshaft. Run this and an auto BP passenger axle on your manual F-series to get rid of the stock extra long axle and have equal length setup like the G-series. Bearing needs replaced. Will include the 3 bolts for mount. $50
MX-3 front LCA's. No bushings installed. $50
OEM BP26 bpv and hoses. Worked fine. SOLD
BP26 turbo inlet pipe. Has the turbo side seal. SOLD
Turbo throttle body coupler. SOLD
Turbo throttle body inlet pipe. SOLD
VF-10 turbo. Bought this many years ago and ended up not doing anything with it. I was going to run it as is with a vj20 hotside. Normal play. Spins free and smooth. Was stored with a bit of oil in the cartridge. No oil/water fittings or wastegate actuator. SOLD
Next is a VJ-20 turbine housing modded by Corksport for their GT28 hybrids they did back in the day. The wastegate hole was also ported and has a VF10 flapper fitted. SOLD
Old school Genie 4-2-1 header. There is a crack between the rear bank of runners. Theres some rust on the 2nd section but its not thin and there are no other leaks. 2.25" ball flange outlet. SOLD
Comment