4WD Shifter Cable BRASS Bushings (transmission end)

[FE3-323]

james. did you happen to take any pictures of the brass cube for the inside of the shifter assembly?? id like to see

[JDuncan]

I didn't, but it looked pretty much identical to the pic here: http://www.wihandyman.com/forum/show...hifter-bushing

It was all very straight forward. The only thing that really took any effort was filing the sides so that it will fit in the slot. I had thought I would be able to just run the brass on the file and do it at the car, but the brass was too hard for that. Once I put it in the vise and used both hands with the file, the file finally started to eat. Then I had to run back and forth as I didn't want to take off too much and have the bushing be too loose.

[FE3-323]

looks pretty decent for a replacement option. i'll take a note

[jwaxt200]

so do the regular Corksport bronzoil bushings work on the 4wd's or do we need to buy special made ones? I've been looking everywhere for an answer so hopefully someone here knows. Thanks

[FE3-323]

no the bronzeoil bushings corksport sells are for the FWD

[dislexicdime]

hate to thread jack but i found these in my gtx any one know who maid them?
i think they are delron

[FE3-323]

looks better then OEM regardless!!

[jwaxt200]

so today i learned why my shifter feels like a sloppy piece of ****. it was finally warm enough to open the hood long enough to take a look, and i had my friend wiggle the shifter while i looked at the transmission end linkage. um.... i think my bushing is missing... ha yep. it is.
So now i dont just want new shifter cable bushings, i NEED them.
just to make a 100 % sure i get the right ones... it's speed source.net mitsubishi evo 8 & 9 6 speed yea?

[BFMRGTX]

hate to thread jack but i found these in my gtx any one know who maid them?
i think they are delron

Those look like the Jacsport bushings. I have them installed on mine.

[SgtRauksauff]

just to make a 100 % sure i get the right ones... it's speed source.net mitsubishi evo 8 & 9 6 speed yea?

those are the right bushings. there are other places to get similar after-market bushings as well, I just happened to run across speed-source at the time.

I just checked their website, looks like they've updated since I last checked!

--sarge

[jwaxt200]

ok awesome thanks for the help. this will be nice to have a good shifting car again ha

[jwaxt200]

wow. this was one of the most cost effective upgrades i've done to my car! very tight now! i love it. wasn't even very hard

[BFMRGTX]

wow. this was one of the most cost effective upgrades i've done to my car! very tight now! i love it. wasn't even very hard

Did it come with the tiny square bit for the shifter?

[josh95mx]

Corksport Sold some white delron type bushings a while back. That's where I bought mine for the AWD MX. they look just like those

[Talkurt]

So those linked above fit a gtx? Or no :/