I have a 2002 Protege5 and I am simply trying to find an existing hole that I can get a 4 gauge power cable through the firewall with, to hook to the amp. Any advice would be appreciated. Thanks. Nic
Announcement
Collapse
No announcement yet.
Power from battery to amp
Collapse
X
-
Poke it through the grommet that the stock wiring harness goes through. It's on the driver's side just above the clutch pedal. You might have to widen the hole in the rubber a little bit depending on the size of the wire, but it'll fit with no trouble.
Picture 1: engine side
Picture 2: passenger side
Comment
-
Kevin
Bear in mind what year he's talking about fellas. Gen to Gen has variations in grommet positions. Moreso, if you have to drill through the firewall of the protege to get a single 4 gauge wire through, you've done it the hard way!
Kevin
Comment
-
i found a nice spot maybe i can get some pic but there is a whole in my firewall filled with a white cap if you look right above your pedels in car.2002 LX:
sony amp with FR 15" sub
white gauges
pioneer deck
cooming this summer:
18" enkei rims
pirelli PZero Nero M&S
MagnaFlow Exhaust
7" LCD monitor deck
carbonfiber dash kit
cold air intake
wings west spoiler
JBL 1100 amp with RE XXX sub
Comment
-
Originally posted by KevinBear in mind what year he's talking about fellas. Gen to Gen has variations in grommet positions. Moreso, if you have to drill through the firewall of the protege to get a single 4 gauge wire through, you've done it the hard way!
Kevin
Comment
-
Originally posted by arlehki found a nice spot maybe i can get some pic but there is a whole in my firewall filled with a white cap if you look right above your pedels in car.
that's the cover for where the clutch would go through if you had a standard tranny. you can take that white piece out and drill a hole for whatever size wiring you need then put it back in. i had 1/0 going through mine.
Comment
Comment