hehe, that's good to know
Announcement
Collapse
No announcement yet.
new front stage
Collapse
X
-
its still not fair. I love my family, good thing my car is a part of my family hopefully I can start my spl setup in a few months since i landed a nice paying job, just have to keep from putting money into other things, IE: lowering srings, dishwasher, new porch, paint job, blablabla.
any updates blue on the installLast edited by walight01; 11-30-2003, 11:59 PM.'02 classic red p5
currently enrolled in AA.
Comment
-
Originally posted by asylum24
he cant type he accidently fiberglassed his hand to the door
lol, that's a good one actually i've gotten pretty far with it all. it took a lot longer for the fiberglass to harden, since it was cold i almost doubled up on hardener, and it still took forever to harden. i was sitting outside with a blow dryer for a while anyways, all the wires have been run into the door for the amps, i've made the mounting plate for the amps, so they'll be bolted to the door. i've got the passenger door cut to where it needs to be to fiberglass it in, so it's flush with the amp, and transitions into the pod for the 8. the wood piece that the amp mounts to will be bolted to the metal door panel, and so will the pod for the sub. i've got the chips made for the 4xs, and still trying to decide if i want to use the x-over that came with the type R's, or use the 4xs and run more power to them the kick panels are almost done. all the fiberglass is finished, and now it needs a little sanding and bondo i might sell the kick panels and type R's to buy some components that can handle more power and possibly the TV for my dash:p: aside from the front stage, i got sick of not having a sub, since the brahma is still off for service so i quickly built a box for the 8's. it's .65 cu ft, tuned to 36 hz, and each 8 is getting 100 watts. it actually sounds awesome. my friend's thought i put in some 10's. other than that nothing else going on.
Comment
-
Originally posted by Intruder
aww, that's too damn bad... I wanted to see what your amp mounting plate looks like and how you mount it to the door and all that...
Comment
-
aww man, I have to do something similar to my doors. every piece of the door rattles. those plastic things that attach the panels to the doors are worth nothing. I've removed the panels so many times that their holding strenght has diminished tremendously. I don't know how to proceed. Even my side mirrors rattle like crazy. All I have to do is rev the engine to about 1200rpm and the mirrors rattle. And when the music is playing the mirrors rattle even without the subwoofer.
Comment
-
Cool, thanks for pointing that out blue.
I don't know if you remember, but I had my doors covered in Brown Bread. Apparently it reduces road noise, but failed to get rid of the cracking plastic noise produced when the panels rub against other parts of the door - that's my problem.
Here's a picture:
Comment
-
for where the plastic meets anything else, whether it be plastic or metal, either use extra brown bread, if you have some left, or get some really soft weather stripping. i'm going to put weather stripping all around my door panel, and where the top and bottom half screw together i'm going to have to do something, cause i know the 8's are going to rattle like hell
Comment
Comment