So I am ordering a new clutch for my mx-3 with a bpt swap and a g series tranny. Right now I have a centerforce dual friction in it and I must say it is a piece of ****.. Slips way too much.. apparently theyre only rated for 200 ft lbs of torque at the flywheel.. and Im making like 250. Anyhoo.. I asked for a clutch that is rated for at least 300 ft lbs of torque.. since Im rebuilding the motor over the winter to take a little more boost.. at least enough to make 250 whp and 250 tq.. The guy apparently said that the transmission will not take that kind of power but I dont think hes right.
Can anyone tell me what a g series tranny is actually good for power wise? I know there has got to be some people out there dragging with these gearboxes..
Can anyone tell me what a g series tranny is actually good for power wise? I know there has got to be some people out there dragging with these gearboxes..
Comment