For the pros... to post up.. for search purposes..
Announcement
Collapse
No announcement yet.
Kia Tranny how - to installl
Collapse
This is a sticky topic.
X
X
-
copied from the FS thread in which you asked:
kia axles, jackshaft, mounts(just the upper brackets the rubber mounts work) and atleast for me i needed the slave cylinder and had to rebend my clutch line
tho I have heard some Pro LX and EGT owner have used there stock slaves
also the front lower mount is really close to the radiator fan support (less than a 1/4 inch)"Discontent is the first necessity of progress."
-Thomas A. Edison
"There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."
*Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
*Junked* KLZE powered 323 on Megasquirt 1
172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
New Daily stock 1.6L 1999 Mazda Protege LX
-
banhammered
speaking of this thread i have pics to add"Discontent is the first necessity of progress."
-Thomas A. Edison
"There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."
*Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
*Junked* KLZE powered 323 on Megasquirt 1
172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
New Daily stock 1.6L 1999 Mazda Protege LX
Comment
-
dammit i forgot about that. need to go get them off my laptop"Discontent is the first necessity of progress."
-Thomas A. Edison
"There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."
*Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
*Junked* KLZE powered 323 on Megasquirt 1
172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
New Daily stock 1.6L 1999 Mazda Protege LX
Comment
-
for a protege LX or escort GT it bolts right in, just like stock. the only thing you have to do "different" is use the kia axles and jackshaft, but they fit like stock as well.Escort GTR -- 11.87 @ 117.6 mph -- 320 HP / 325 Ft. Lbs. @ 23 PSI
... The first FWD BG with a Toyota E153 transmission conversion in the USA!
Looking for BP x Toyota E153 adapter plates? PM me or contact me on Facebook: Riel Performance Parts
Comment
-
Originally posted by Loco_R View Postcorrect me if i am wrong, put the kia has more lines (english is my second language) in the cv joint
--FerdiIf you can't differentiate between brake and break, you should go back to school
-----
Miscellaneous Pics of Turbo Protege Build
Big Front Brake Install using Wilwood Calipers
Factory Service Manuals and Familia Brochures - PDF
Comment
-
Originally posted by Loco_R View Postwhats the name whre it goes the whell, and the ball joints, because you need to change that also, other wise the cv joint will not fit.
--FerdiIf you can't differentiate between brake and break, you should go back to school
-----
Miscellaneous Pics of Turbo Protege Build
Big Front Brake Install using Wilwood Calipers
Factory Service Manuals and Familia Brochures - PDF
Comment
-
what did the Kia tranny come out of? Make/Model?
1988 323 Station Wagon - KLG4 swapped
1988 323 GT - B6T Powered
2008 Ford Escape - Rollover Survivor
1990 Festiva - First Ever Completed KLZE swap (SOLD)
If no one from the future stops you from doing it, how bad of a decision can it really be?
Comment
Comment