How To: Toyota E153 transmission conversion

[soul]

1500 rpm power band ??? that was my white wagon ..... was on 24psi by 3500 i was running a gt 3076r with a .63 t3 houseing......... and yes i made the adaptor plate for fe3 to e series but it is not to run 4x4 the fe3 is way to wide in the bottem of the block and it hangs way to low to cut the sump out to make clearance for a transfer ........ its hard to understand its like you can sit the block with a crank in it on the ground with no sump and the crank wont touch the ground.......

[FE3-323]

i still dont know how you spool'd so fast ben. mine doesnt' spool for ****.

[soul]

ummmmm turbo quality maybe? quads maybe helped and the aftermarket ecu would have helped aswell ........ jesse did notice a difernce when he put my short runner inlet on his grey wagon .... yours should spool hard... maybe an issue in the gate

[adikgemok]

Can someone kindly email me the CAD drawing for the plate so I can look for someone who can fabricate it?
My email is afzam.sutera@gmail.com

Thank you...

[Boosted Escort]

cad drawing are not available you need to buy the plate and have it shipped over sea.

[mazkam]

I'm having a hard time locating the Celica shifter cables. Does anybody know if the MR2 shifter cables would work?

[Redtx3]

Who do I talk to about getting the adaptor plate for the e153 conversion?

[fuadmsp]

I recently purchase a 1988 323 gtx. It wasn't running when i purchased it and now fixed it.
So basically what i want to do is swap a fs20det from a mazdaspeed protege into the gtx.

1. From what i remember somebody swap a 323 4 door with a klde or ze meaning i should be able to swap the mazdaspeed protege engine as a front wheel drive since the klde or ze swaps into a mazdaspeed protege.

2. I also remember reading that mazdaspeed protege fs20det can possibly combined with a jdm celica awd trans. My plan is to do a haltech powered fs20det forged engine awd 323.

Basically im looking for a trans i can use with the fs20det and keep the car awd.

I have a lot of these part currently forging and building an fs20det already have a haltech platinum 1000... Just need a awd trans to start the process

[FE3-323]

^ who the F is this jokester???

[fuadmsp]

^ who the F is this jokester???

not new to this forum but i hardly used my account till i purchased my 88 gtx. i mostly used mazdas247.com
my current project

http://www.mazdas247.com/forum/showthread.php?123838315-Grey-Msp-Rebuild-Round-3

my gtx

http://www.mazdas247.com/forum/showthread.php?123841813-323-gtx

most of the info I'm stating in my post are things i found on google and currently looking threw peoples builds or how to write up since i started using this thread searching for info. Your help THANKS BRA

[fuadmsp]

Im going to start looking for the gt4 trans im figuring i might need an adapter plate like the fe3 engine to run the gt4 trans

[jay]

^Well, yeah, and you'll almost be certainly be fabbing it yourself...

[fuadmsp]

Where is a good place to look for a clean trans im starting with the toyota celica forums and researching more about the trans

[FE3-323]

fuadmsp- If you can find someone to make an adapter plate for the FS motor to a Toyota transmission please count me in.
i support your search

[fuadmsp]

fuadmsp- If you can find someone to make an adapter plate for the FS motor to a Toyota transmission please count me in.
i support your search

Im still learning about the trans any info would be awesome haven't quite yet found one for sale i have a few fs block laying around to test with