If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I need to play with my accel enrichments, it's bogging on too much fuel... too rich! What kind of A/F's should I be trying to hit, or any tips on testing out what is right?
I got MS2.
JoN - Automotive Machinist Journeyman/Refrigeration Mechanic Journeyman
Member of MX-3.com
1996 Mazda MX-3 RS - Creek Blue Mica
1993 Mazda MX-3 GS SE - Raspberry... RIP
The O2 sensor is usually too slow to react to accel inputs. The best way to set this up is to drive the car, log the bogging, and try pulling/adding fuel at that particular TPS Dot until it smooths out.
You want to target the same AFR's as when running. No need to go richer. So just pull some fuel until you won't see any more dips in your AFRs. The goal is to avoid running lean when punching in the throttle but not flooding it either.
Escort GTR -- 11.87 @ 117.6 mph -- 320 HP / 325 Ft. Lbs. @ 23 PSI
... The first FWD BG with a Toyota E153 transmission conversion in the USA! Looking for BP x Toyota E153 adapter plates? PM me or contact me on Facebook: Riel Performance Parts
Comment