Choices of Wideband O2 sensor compatible with MS2

[cis2711]

I am going to receive my tax return any day now and I'm going to order a PNP MS from stratified. Now, I have been running an Innovate LC-1 wideband for years now and it has finally taken a crap. I was considering the LC-2 that Innovate offers however I don't really like the fact that I have to calibrate it so often..

Then I came across Zeitronix. Here's a link: http://www.zeitronix.com/order/order.htm

I don't know if the Zeitronix unit will communicate with the MS2 though. I am wondering if anyone here can tell me what widebands will communicate with the MS2 that Lex builds. Any advice would be helpful thank. - Cole

[Boosted Escort]

get an innovate mtx-l, innovate lc2, aem uego, or plx wideband. stay away from the zeitronic they tend to have a short life.

[MazdaNoob]

http://www.ebay.ca/itm/APSX-D1-Digital-Wideband-Controller-Enclosure-Display-Bosch-4-2-Sensor-/181273702846?pt=Motors_Car_Truck_Parts_Accessories&hash=item2a34c131be&_uhb=1

[redheddude222]

I prefer the AEM UEGO. I have it in all 3 of my cars.

[yunvmyegt]

get an aem unless you want to spend your extra time trying to figure out why it doesnt stay calibrated or just want to say you have an innovate wideband....

[Lex]

I am going to receive my tax return any day now and I'm going to order a PNP MS from stratified. Now, I have been running an Innovate LC-1 wideband for years now and it has finally taken a crap. I was considering the LC-2 that Innovate offers however I don't really like the fact that I have to calibrate it so often..

Then I came across Zeitronix. Here's a link: http://www.zeitronix.com/order/order.htm

I don't know if the Zeitronix unit will communicate with the MS2 though. I am wondering if anyone here can tell me what widebands will communicate with the MS2 that Lex builds. Any advice would be helpful thank. - Cole

I haven't had direct experience with the Zeitronix but the output is compatible with the MS. http://www.zeitronix.com/Products/zt2/zt2.shtml

I have direct experience with Innovate and AEM. The AEM gauge/controller for the sensor tends to overheat. I've had two and the connectors in the back end up making a poor connection causing the AFR to be off. After fiddling with them they did work but the connection was a nuisance.

The Innovate hasn't had such issues but the gauge is bought separately. The sensors are cheap to replace however. If you want an innovate, send me a message through my site before placing the order for the system, I will see what I can do for pricing on it.

https://www.stratifiedauto.com/index.php?main_page=contact_us

[Lex]

BTW, I know I am not here often but if anyone has any questions please feel free to contact me directly through my website. We still make and support the ECUs for the BG chassis and try and keep it affordable.

[Loco_R]

just purchased it.