safc hookup

[Marc93lx]

Well good news, I got it running correctly. I called up Corksport and talked to Derrick, and told me which wire to connect it to. If you take off the boot on the tps connector, its the green/white wire. Now I just gotta figure out how to use the damn safc now.

You should post up a how-to for the entire install.

[limpgtx]

We'll Bruce, I would give the overall product a 10/10, but on our cars I'd give it a 7/10. The fact that we cant tune WOT with it blows, well worth all the way up to 90% throttle though. This is where a fuel pressure regulator is gonna help me.

[limpgtx]

You should post up a how-to for the entire install.

Its not hard at all, theres a diagram of the gtx/r ecu in the manual. Im just running the actual 323 harness since mine was cut, Corksport spliced it to get it running correctly so I figure things are different since I hooked up the rpm signal to my msd box, and the throttle signal near the TPS rather than at a pin. If your harness is cut, just email me.

[jacobrussell]

oh wait

my teams site

http://nwerdt.com/how-to/electrical/S-AFC.HTM

[Geovannie]

ElsCotto, can you give us the wiring diagram you used. I can only find the ones for a GTX 323. I'm assuming the ecu pinout is different.

[elscotto80]

I dont have a scanner to let you see the diagram I have. What ECU or car do you have. I know what to splice into for the 91 EGT. PM me.

[Geovannie]

Yes I have a 88 323 but it has a engine/harness/ecu from a 90-94 escort GT. I will PM you.