My old air box looks perfect in there
Announcement
Collapse
No announcement yet.
Photos of ISHI/vj20 hybrid from GPOPSHOP(Arkansas) Rebuilders
Collapse
X
-
92 Mazda MX3 GS> For sale, $1750 OBO
94 Escort wagon--BP swap coming, VF10 Turbo, COP, EVO ECU, 03 ZX2 front end conversion
"Hold yourself accountable before you are held accountable"
EV14 330cc@3Bar injector kits available.
EV14 GT500 injector kits available for the BP. 610cc@3Bar.
EV14 925cc@3Bar injector kits available
BP Forged H beam rods available now
KL Forged H beam rods available now
K8/KF Forged H beam rods awaiting test fit
FS Forged H beam rods awaiting test fit
F2 Forged H beam rods awaiting test fit
FE3 Forged H beam rods coming soon
Mitsubishi 3.8 MIVEC rods coming soon
Aluminum CAS/Distributor caps
BP oil jet eliminators
EV14 fuel rail spacers
More stuff coming soon.......
-
I have an opportunity to buy this Mercury Tracer for $350. It needs a front bumper and a steering wheel airbag and a headlamp. I believe I am going to buy it and swap my GTX and kia trans into it along with the 5 speed stuff since it is an automatic car. I know this has been done before so I should be able to as well. It is a 94 but I'm hoping to install my 95 dash and interior. Doesn't the front and rear seats interchange between stationwagons and hatchbacks? I know the panels and trim are different but IIRC the seats will swap just fine.
Comment
-
front seats are exactly the same, rear has those side cushions in place of the trim panels from the 3-door so GT interior won't quite match (if that's something you care about).
wiring from 1.9/ATX to BPT/5MT blowwwwwwwws... but if you're going to take the time to swap dashes, you might as well swap the body harness (that runs along both fenders and behind the dash) while you're in there, it'll save you from having to figure out a bunch of dumb wiring.sigpic
03 Accord DX: K24/5MT, peasant-spec old man's car
92 240SX: KA/T25, nerd mobile
Comment
-
Okay well I can see if the interior will clean up. The previous owner had a black dog soooo....yeah. We'll see. My place of work has an extractor in detail dept., maybe I can borrow it for an hour.
I would like to swap the dash and while I'm there I'll be sure to swap over all the harnesses. Didn't someone have a swap thread for this scenario?
Comment
-
How much machining was required for the exhaust side housing?
I've been getting quotes for 300+ for just machining with out any other work done and it seems excessive.Beater=/= Sleeper
Originally posted by kozzman555kitty, you are a hilarious womanOriginally posted by HopelessCowthere is one thing i dunno what is that call,a thing look like a gun, u press the button and stick to the metal and it makes firework, do i need that thing?and what s the philip head screw drivers?
Comment
-
No machining was necessary to accommodate the Tbird cold side, they utilize the same CHRA. They are both RHB5 so the install is easy. I sent GPOPSHOP the vj20 CHRA, the Tbird inducer(which is the only difference), tbird exducer(same as vj20), and cold side housing with inlet adapter(I told them where to clock the outlet to the cold side).
Now I spent too much money on my hybrid but it has a warranty and has performed well since I installed it. I spent roughly $700 on a total rebuild/hybrid/balance/with warranty.
If by machining you are referring to the porting of the wastegate orifice then I don't really know. All I know is I asked them to port it and install a new button to accommodate the size of the port.
Comment
-
My worklog has all the wiring details, but I would just swap the harness like Atomic said.92 Mazda MX3 GS> For sale, $1750 OBO
94 Escort wagon--BP swap coming, VF10 Turbo, COP, EVO ECU, 03 ZX2 front end conversion
"Hold yourself accountable before you are held accountable"
EV14 330cc@3Bar injector kits available.
EV14 GT500 injector kits available for the BP. 610cc@3Bar.
EV14 925cc@3Bar injector kits available
BP Forged H beam rods available now
KL Forged H beam rods available now
K8/KF Forged H beam rods awaiting test fit
FS Forged H beam rods awaiting test fit
F2 Forged H beam rods awaiting test fit
FE3 Forged H beam rods coming soon
Mitsubishi 3.8 MIVEC rods coming soon
Aluminum CAS/Distributor caps
BP oil jet eliminators
EV14 fuel rail spacers
More stuff coming soon.......
Comment
-
Oh that looks bigger than I recall the T-bird turbo being, which is why I asked.Beater=/= Sleeper
Originally posted by kozzman555kitty, you are a hilarious womanOriginally posted by HopelessCowthere is one thing i dunno what is that call,a thing look like a gun, u press the button and stick to the metal and it makes firework, do i need that thing?and what s the philip head screw drivers?
Comment
Comment