What is the maximum EGT the BPT engine can take. I need to know when my car is running dangerously lean. I ask because I have a 323 with a BPT engine and I want to know what is the limit. Right now in fourth the car runs at 1300F. I think is running lean but no signs of detonation.
Here are my mods for reference:
Mazda 323 1994
RX-7 non-turbo AFM.
Factory BPT Intercooler.
3-inch mandrel bent exhaust no cat with a 3-inch in and out Dynomax Ultra flow muffler.
Greddy Profec B Boost Controller set at 11 PSI.
Autometer Cobalt EGT and Boost Gauge.
ACT Heavy Duty clutch with street disc, Protege SOHC Flywheel.
NGK V-Power Plugs #6 heat range.
K&N Cone Filter.
BP01 Protege ECU.
Obviously my next will be a Walbro in tank fuel pump.
Any other recommendation will be appreciated.
Thanks
Here are my mods for reference:
Mazda 323 1994
RX-7 non-turbo AFM.
Factory BPT Intercooler.
3-inch mandrel bent exhaust no cat with a 3-inch in and out Dynomax Ultra flow muffler.
Greddy Profec B Boost Controller set at 11 PSI.
Autometer Cobalt EGT and Boost Gauge.
ACT Heavy Duty clutch with street disc, Protege SOHC Flywheel.
NGK V-Power Plugs #6 heat range.
K&N Cone Filter.
BP01 Protege ECU.
Obviously my next will be a Walbro in tank fuel pump.
Any other recommendation will be appreciated.
Thanks
Comment