Nerd Racing's 94 Ford Aspire Work Log

[DeeAOne]

Its red with white! I ran a jumper real quick to test my theory:



My neighbor came out of his house because he thought someone was stealing his motorcycle!

oh we might have two different harnesses then. lol im using the 626 harness.

im pretty sure white/green is the main one on mine. thats awesome though man. great job. do you mean the wire is white with red stripe?

[nerd racing]

yeppers. I'm gonna tie it into the correct aspire wire so that stupid failed fuse buzzer will shut up. (the second pitch one you hear)

[DeeAOne]

yeppers. I'm gonna tie it into the correct aspire wire so that stupid failed fuse buzzer will shut up. (the second pitch one you hear)

yep i pulled that one out of my car long time ago. lol and yeah i know what wire you are talking about now. i think i wired both of those into the main wire coming off the fuel pump relay from my original B6.

[nerd racing]

hmm maybe i'll look into that. gotta have all my sensors working.

[DeeAOne]

yeah i dont remember which wire is the one for all the sensors. its either black with white stripe or black with blue stripe. its also in that same plug.

[nerd racing]

what year 626? Mine is a 95

[DeeAOne]

93. i heard there were some differences between the 93-94 and the 95...? do you know?

[nerd racing]

ahh that would be why there are wire differences.

I think mine is set, just gotta hook the exhaust up (and o2 sensors lol), make a throttle cable bracket, Axle welding, and a couple clutch lines.

[DeeAOne]

ahh that would be why there are wire differences.

I think mine is set, just gotta hook the exhaust up (and o2 sensors lol), make a throttle cable bracket, Axle welding, and a couple clutch lines.

awesome. dont forget to wire in that CEL. i have yet to do mine. and im sure im throwing some codes because i can hear a misfire at idle and i think my IACV is bad. (junkyard throttle body). then again i do have spark plugs that are meant for boosted hondas..lol. they probably need to be re-gapped.

[nerd racing]

Its wired in already man, I made sure of that one. Just gotta finish doing the cluster wiring lol.

[nerd racing]

I had lost all ambition till now. I want to stay up all night working on it now, but I think I'll savor the "high" till tomorrow after work.

[DeeAOne]

did you just wire in the CEL wire off the cluster to the one that comes off the v6 ECU?

[nerd racing]

yep, keep in mind I'm using the 626 cluster too, so I could have the electronic speedo and it will be the correct speed when i get the proper size tires.

[DeeAOne]

i dont think that cluster fits in my dashboard. i put a BG manual speedo gear on my BF speedo cable and stuck it in the trans. i have not yet tested to see if its off or not.

[nerd racing]

that should do the trick, I am willing to bet you won't be too far off. Mine with the tire size I have now will read faster than actual speed so I'm down with that till I can afford some new rubber for my EGT 7 spokes.