1988 BF hatch....There is a white female single spade connector that splits off from the harness at the throttle position sensor. It is black with white stripe and fairly heavy gauge 12-14 maybe. What does it go to? I have the FSM wiring but, this connector is not listed ( I think). It has 12 volts to negative, I will double check. It must power something.
I put the head on and ran into a problem with the harness. And, it wont start.
The wiring should be stock setup, I bought the car in pieces, so i have to put it back together
timing marks are set but the rotor is pointing past # 1.
(Calling #1 the one on top of distributor circle. Should it be the one closer to the radiator?)
...any help appreciated. Thanks.
I put the head on and ran into a problem with the harness. And, it wont start.
The wiring should be stock setup, I bought the car in pieces, so i have to put it back together
timing marks are set but the rotor is pointing past # 1.
(Calling #1 the one on top of distributor circle. Should it be the one closer to the radiator?)
...any help appreciated. Thanks.
Comment