If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
It won't bolt straight up, you'll need to mod the xmember. Two of the bellhousing bolts don't line up but iirc they aren't terribly important ones. The front lower trans mount will need to either be modded or fabricated, I think, with a b6t but I'm not certain. If you have a GTR mount you may be OK. Then, you'll have halfshafts that need hybridizing in order to work. But that VLCD is a cool thing to have, and the gearset's some stronger.
Yeah, it's compatable with the rear diff, and the rear driveshaft bolts up. you'll need a set of inner front halfshaft from a BG car and mate them with the outer CV's from your car.
Comment