Originally posted by rotary84
View Post
Announcement
Collapse
No announcement yet.
isuzu Imark bumper
Collapse
X
-
-
Originally posted by corby_baby View Postare imark bumpers the same as imark rs bumpers?
BTW, I anchored mine by using 1.5" steel L-channel cut into about 4" lengths. Then, I drilled holes and bolted 2 of those 4" sections together so that the existing bolts on the back of the steel bumper frame would meet up with it. It's holding up well. Crazycanadian, who bought my first I-Mark bumper and used the same method had some difficulty with it because this set-up doesn't hang the bumper with a lot of bolts and it could eventually snap the bolts. i haven't had this problem yet. I believe crazycanadian found another way to reinforce it so that this won't happen but I haven't seen how he's done this. I'm sure it's sutrier than my way.Last edited by LN323; 03-07-2011, 10:17 PM.
Comment
-
Originally posted by BFMRGTX View PostDum-dum-DUMMMM!
Now you've done it, next thing you know, you'll be swapping motors; you'll have to in order to fit the FMIC behind the bumper.
It's the next logical step.
I await your worklog, your pics taken at 0300hrs, the empty cans of beer, the greasy handprints on the fender. Oh yes, there's no turning back now.
muhahahahaha!
Comment
Comment