I installed it this morning. Just had to hog out the front bolt holes on the brace because they were off about 3/8”, and hack saw off ¼” of the bracket on the drives side because it was up against the cradle. You will want to use longer bolts where it attaches to the rear A-arm bracket. OEM ones are too short with the added thickness of the brace.
Because the front part of the brace is flat, I was able to install the RRE lower brace right on top of the TT brace. Many have asked if the brace works with the BPT. It does on mine. But my exhaust is designed to miss the RRE brace.
I did this in 1.5 hours on the floor using jack stands. I encourage you to use a lift it you can.
It’s a nice piece. Looks good and I think it should help with the floppy GTX chassis.
Thanks TT for having this available for the GTX.
Because the front part of the brace is flat, I was able to install the RRE lower brace right on top of the TT brace. Many have asked if the brace works with the BPT. It does on mine. But my exhaust is designed to miss the RRE brace.
I did this in 1.5 hours on the floor using jack stands. I encourage you to use a lift it you can.
It’s a nice piece. Looks good and I think it should help with the floppy GTX chassis.
Thanks TT for having this available for the GTX.
Comment