Originally posted by racerboygtx
Announcement
Collapse
No announcement yet.
Escort GT / Protege Question
Collapse
X
-
sorry it was a mistype i meant 1.8 dohc 93 protege
will the 90 mazda 323 5spd and flywheel bolt up to the 93 1.8 dohc block
i need asap i have a job waiting for me as soon as the car is fixedhttp://www.cardomain.com/ride/2520103
Pardon Tigers Looks But Shes, Gorgeous in my eyes.
5spd Out of a 1993 Mazda 323 LX
Stock Dohc 1.8 (BPO5-8-1)
Stock Flywheel off a 1993 Mazda 323 LX
Stock Clutch kit off a 1993 Mazda MX3 SOHC 1.8(??)
Comment
-
yes that will work. but make sure you buy a good quality clutch, the 323 flywheel is kinda small.
-jonEscort GTR -- 11.87 @ 117.6 mph -- 320 HP / 325 Ft. Lbs. @ 23 PSI
... The first FWD BG with a Toyota E153 transmission conversion in the USA!
Looking for BP x Toyota E153 adapter plates? PM me or contact me on Facebook: Riel Performance Parts
Comment
-
hello all, bad news, my original 93 pro lx blew the cam shaft again, im saying this because the camshaft chewed up the cam journals, and the cam snapped in half,
exhaust cam,
so picked up another 93 pro lx today for a down payment of a 100 usd dollars, i owe 150usd dollars and ill have the title, the car just needs a clutch, so im pulling brand new acuna spec clutch out along with my modified, 323 lx tranny and bolting it in, along with my 2.25" straight pipe in it as well,
installing my 85 amp alternator.
brand new high performance water pump.
brand new high performance oil pump.
and my rx7 vaf, and custom cold air intake.http://www.cardomain.com/ride/2520103
Pardon Tigers Looks But Shes, Gorgeous in my eyes.
5spd Out of a 1993 Mazda 323 LX
Stock Dohc 1.8 (BPO5-8-1)
Stock Flywheel off a 1993 Mazda 323 LX
Stock Clutch kit off a 1993 Mazda MX3 SOHC 1.8(??)
Comment
-
Originally posted by racerboygtx View Posthello all, bad news, my original 93 pro lx blew the cam shaft again, im saying this because the camshaft chewed up the cam journals, and the cam snapped in half,
exhaust cam,**SOLD** 93 EGT with more suspension mods then your average riced out civic's # of decals + useless "bling/style/culture" mods! **SOLD**
95 EGT New beater! And gawd damnit shes NOT pink!
Comment
-
the trany was modified by my dad, what ever he did to it, i have no idea, i just know that the car does not do a one wheel burn out, it does a two wheel know.
the cam was stock i was just driving to the mcdonalds, it made a ****ing loud as clunk, the car just stopped. nos no i dont use it, no offense intended, but nos is for the people that granny shift.
well any ways i just got the tranny in my car everything is connected, but the car wont start now, wont even turn over, hell the car was running before i swapped out all my parts. any idea of what is keeping my car from turning over, ive checked all fuses, relays, double checked the wiring for the starting system, its all connected.
im thinking that the starter just gave up after started last nite and let it run for an hour.http://www.cardomain.com/ride/2520103
Pardon Tigers Looks But Shes, Gorgeous in my eyes.
5spd Out of a 1993 Mazda 323 LX
Stock Dohc 1.8 (BPO5-8-1)
Stock Flywheel off a 1993 Mazda 323 LX
Stock Clutch kit off a 1993 Mazda MX3 SOHC 1.8(??)
Comment
-
yep your correct, asked my dad about it, hes already started on another tranny for me, think he said it was AWD, and its a late christmas/early b-day gift when hes done,
My dad rocks, he backs me 100 percent on me doing what i love (street racing, rally racing etc).http://www.cardomain.com/ride/2520103
Pardon Tigers Looks But Shes, Gorgeous in my eyes.
5spd Out of a 1993 Mazda 323 LX
Stock Dohc 1.8 (BPO5-8-1)
Stock Flywheel off a 1993 Mazda 323 LX
Stock Clutch kit off a 1993 Mazda MX3 SOHC 1.8(??)
Comment
-
no but im looking for a full euro protege, right hand side drive and all,
i just want a rolling chasis.
no wiring harness
no motor
no fuel tank
nothing but suspension, wheels, one seat, and dash
everything else doesnt have to be there
basicall i want a straght shell, hood less, front fenders you can keep, decklid you can keep, just so long as it has the awd rearendhttp://www.cardomain.com/ride/2520103
Pardon Tigers Looks But Shes, Gorgeous in my eyes.
5spd Out of a 1993 Mazda 323 LX
Stock Dohc 1.8 (BPO5-8-1)
Stock Flywheel off a 1993 Mazda 323 LX
Stock Clutch kit off a 1993 Mazda MX3 SOHC 1.8(??)
Comment
-
oh i need ahead for my 93 pro, DOHC 1.8,
no valves
no cams
just a straight bare head
i can pay atleast 125-175 usd for the bare head
im looking for BP-26 TurboManifold with VJ-14 Or a VJ-20
BP-26 ECU,
Awd Tranny case only, no internals, Transfer case has to be fully assembledhttp://www.cardomain.com/ride/2520103
Pardon Tigers Looks But Shes, Gorgeous in my eyes.
5spd Out of a 1993 Mazda 323 LX
Stock Dohc 1.8 (BPO5-8-1)
Stock Flywheel off a 1993 Mazda 323 LX
Stock Clutch kit off a 1993 Mazda MX3 SOHC 1.8(??)
Comment
-
Hmmm!
Originally posted by racerboygtx View Postno but im looking for a full euro protege, right hand side drive and all,
i just want a rolling chasis.
no wiring harness
no motor
no fuel tank
nothing but suspension, wheels, one seat, and dash
everything else doesnt have to be there
basicall i want a straght shell, hood less, front fenders you can keep, decklid you can keep, just so long as it has the awd rearendDavid
sigpic Ky
Comment
Comment