WORLD_domination's beater to TA racer

[bogaut]

the auto harness is wired differently to the ecu

[WORLDdomination]

ok good cause i scouted anthor pick and pull and found a complete lx 5 speed for $450 long block and trans. ima get the fellas together for half off day and we will be pulling it. The b6t is 250 engine and trans so ill be grabbing it down the road also.

[bomdoutscort]

Bp is 125hp and b6t is 130(IIRC). Not much of an upgrade.

Ford bp is mostly small nose crank with no mbsp

Auto harness I'm not 100% sure on but I think its not worth the time

only the 91.5 and under is the small nose.

[WORLDdomination]

pictures finally

ok again she was free but she aint pretty but im takin g care of that now. I alos bought and in stalled the mx3 seats and i love these things thanks bro for the advice. there not perfect but good enough for now and for 40 bucks anyways..........


Paint job and wheels needed!




little rip and wear but overall good shape for now



this is what happens when a 300+ man get in and out of this car for 10 years +



installation was almost too easy with a bad back these seats keep my back in a perfect postion and have good side support as i was told . again thanks guys!

[WORLDdomination]

suspension comes next week stay tuned

[Turpro]

Told ya you'd like them

[tireboy]

got em in my 323 and yeah ..the best money spent so far...

[WORLDdomination]

ok gotta question. How much is a b6t worth? including harness, ecu, intercooler, turbo, turbo manifold, down pipe, all piping, vaf, radiator and g trans from a capri xr-2. Im thinking of picking this up to sell to fund the rest. You guys know best i dont want to put a crazy high or low price lol. thanks

[WORLDdomination]

quick list....

Next junk yard run:

BP (complete with ecu) and g trans
All four corners minus struts front and rear (including brakes and brake lines),
rear seats
mud flaps (front and rear)
lx oem rims
whatever else i think i should grab at that moment

Suspension parts coming next week: (thanks cousin rob!)

H&R lowering springs
KYB GR-2 X4
Tierods!
ST sway bar kit (front and back)
Pedders front bushing kit
Maybe a front swaybar not sure yet might hold out for a gtx one

Suspension left to get:

Cusco camber plates
Pierce rear control arms
Pierce 4 point front tie bar
Pierce rear tiebar

[Turpro]

ok gotta question. How much is a b6t worth? including harness, ecu, intercooler, turbo, turbo manifold, down pipe, all piping, vaf, radiator and g trans from a capri xr-2. Im thinking of picking this up to sell to fund the rest. You guys know best i dont want to put a crazy high or low price lol. thanks

Is the motor from a capri? If so then it has the weaker rods. If its from a 323 gtx then they have solid rods that have gone for 150. Not sure if anything else is worth anything just because most ppl swap in bps

[WORLDdomination]

cool good to know dont want to waste my time. Ill definately focus on getting the BP and trans then

[wgnths]

i would go all the way with the BP. thats just my opinion. and we have lots of info on here to help you along the way with what ever it is you want to do. i want a set of those seats but cant find any around here.

[SleptWithURWife]

Those seats are awesome. I had a set in my first car for years. Never had and complaints. I sat much lower so my head wasn't hitting the roof

Now that I have the GT with its baller JDM seats, I'm going to have to fit the mx3 rails to them to keep the stock appearance.

[WORLDdomination]

Dident get any work down this week due to NASA and Super lap battle at buttonwillow this week. By the way sierra sierra broke the awd fastest record time with a 1:41 in the SSE evo 9 congrats thats hella fast for buttonwillow! anyways ill get the suspension on monday or tuesday hopefully then go pull my engine and trans after wedsday. race season is over so we shouldent be as busy


Where i spent my last 5 days


She rode like a rockstar

[WORLDdomination]

ok anthor week down and still havent got the suspension started. some of the parts are back ordered so its taking me longer. So anyways when i left work yesterday i noticed my engine was making a wierd noise........ looks like a rod is letting go which sucks im hoping she can hold together long enough to get a fresh bp swap. ill have to do it sooner now and buy a seperate bp long block and have it machined. plans changed a little but thats ok **** happens