AWD EGT Build

[theredrocket]

Nope. You use the mazda flywheel and pressureplate. Tis a far better thing to not screw around with crank/flywheel interface. Besides it is much easier and cheaper to have a gt4 disc built with the mazda outside diameter.

Ah crap I just reread my own post. I meant to say disc, not flywheel lol. So you want a Mazda clutch with the Toyota disc. What is the Toyota diameter vs the Mazda diameter?

Also, awesome build Krono. You are doing to your EGT what I'm sure many of us EGT owners have dreamed of.

[scort4life]

OH! OH! OH! Yeah!
The OH face is present! LOL!

[Krono]

Decided to bypass the hy35 and head straight for hx35. Pickin it up this weekend,

[Mazda_Powered]

sexy!

[Krono]

Picked up the mint HX35. Zero shaft play with aBrand new 12cm non-wastegated housing. Traded my hy35 even up for it.








The previous owner put the car in a ditch so the passenger frame rail was pushed. Got it set up on the lift and pulled it out yesterday.



Ready to start fitting the drivetrain.......................

[Mazda_Powered]

double bonus! How did you go about straightening the frame rails?

[1st Gen]

Your turbo looks as big as a watermelon?

[Krono]

How did you go about straightening the frame rails?

\

Set it up on stands like you can see in the pic. Strapped the rear down and pulled from the front. It had to come forward a 1/2" and down 1".

[Georonimo]

Glad to see some progress! Build me one when you're done!
ps. still have those V-stacks and links for you

[AWDXavier]

I keep reading through this thread, gives me all sorts of motivation!

[Krono]

Just ordered everything for my clutch setup.

Competition clutch 4 puck unsprung disc
ACT Streetlite flywheel
ACT HD pressure plate
ARP flywheel bolts.

Hopefully everything comes this week so I can get the motor and tranny mated up. Then the fun begins!!!

[Mazda_Powered]

Nice!! When I bought my first Ebay clutch kit from F1 racing, they shipped me a Stage 3 Competition clutch (in box, with pt# and warranty card) for like $170 shipped haha. I don't know if that's what they normally deal with, but I was happy when I saw the actual retail of said clutch.

Can't wait to see some mating pictures tho

[AWDXavier]

Sounds like a badass clutch setup!



I gotta know more about this crossmember, This is exactly the piece I need for my setup. Guess ill be PMing Jim before too long!

[Mazda_Powered]

Looking at that pic, it looks like the axles are in the rear spindles (AWD BG spindles?)...were the axles the proper length? If so, that's awesome lol

[Krono]

Looking at that pic, it looks like the axles are in the rear spindles (AWD BG spindles?)...were the axles the proper length? If so, that's awesome lol

Yep, AWD BG spindles

Actually, those were a bit short. The ST205 axles are a bit longer and fit perfect. At least I think, lol. Jorge (Georonimo) was the one who took that pic.

I'll find out this weekend. I doubt my clutch parts will be here so i'm gonna get my engine cleaned up and the rear subframe installed.