Announcement

Collapse
No announcement yet.

93 lx

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by FE3-323 View Post
    hoping the disty is the solution
    Hmmm... Have to rotate distributor forward for it to crank now. Before, I was rotating it to the back to get it to crank. I'm checking the timing now.
    [emoji30]

    Sent from my m8wl using Tapatalk
    Last edited by Dixie94Pro; 10-08-2015, 09:33 PM.
    ClubProtege

    Comment


      Hmmmmm.... I wish I wasn't such a noob.

      Ok. When I jump ten+gnd, I have to rev it up and slowly let off the gas (very slowly) to get it to even idle (idles at about 250rpm). I adjusted the idle screw so it idles up at 750rpm. I set the base timing (with ten +gnd jumped). I pulled the jumper and the car started (probably helps that the engine is warm). It idles at 750rpm (even after having adjusted the idle screw in diag... I don't understand that, but whatever).
      The timing mark was very consistent (was very very jumpy before the new distributor).

      I gotta wait until tomorrow to test drive it. The wifey is getting a little frustrated [emoji5]

      Sent from my m8wl using Tapatalk
      Last edited by Dixie94Pro; 10-08-2015, 10:04 PM.
      ClubProtege

      Comment


        the engine was not synchronized:D

        Enviado desde mi GT-S5830M usando Tapatalk 2

        Comment


          like this to fullthrottle

          Enviado desde mi GT-S5830M usando Tapatalk 2

          Comment


            It still won't crank when cold.

            Sent from my m8wl using Tapatalk
            ClubProtege

            Comment


              That sounds like IAC valve has problem

              Enviado desde mi GT-S5830M usando Tapatalk 2

              Comment


                Maybe iac valve has problem

                Enviado desde mi GT-S5830M usando Tapatalk 2

                Comment


                  of which ECU changed when cables were you moved from place

                  Enviado desde mi GT-S5830M usando Tapatalk 2

                  Comment


                    Help.

                    6 minute video of me and the Protege doing crap.
                    ClubProtege

                    Comment


                      Wires which were you exchange in ecu

                      Enviado desde mi GT-S5830M usando Tapatalk 2

                      Comment


                        Originally posted by mazda323bp View Post
                        Wires which were you exchange in ecu

                        Enviado desde mi GT-S5830M usando Tapatalk 2
                        I swapped 2L and 2M

                        Sent from my m8wl using Tapatalk
                        ClubProtege

                        Comment


                          uff is a broken head and guru of the forum are

                          Enviado desde mi GT-S5830M usando Tapatalk 2

                          Comment


                            Timing mark location it ok

                            Enviado desde mi GT-S5830M usando Tapatalk 2

                            Comment


                              What about your Fuel Pressure Regulator? Had that tested yet?
                              Not What you build, But HOW.

                              Comment


                                I carefully watched the video and showed it to a friend and you have time engine checker

                                Enviado desde mi GT-S5830M usando Tapatalk 2

                                Comment

                                Working...
                                X