What did you do to your BG(part 8)

[FE3-323]

sanded the **** out of my block deck. cleaning tomorrow & installing my cylinder head/MLS headgasket/ARP headstuds

[MD323]

re-re-reassembled the engine bay in the car along with the new subframe with upgraded bushing, larger EGT brakes and front swaybar. still awhile to go before shes back on the road but now that its cooling off I can get work done at a more acceptable pace.

[FE3-323]

what bushings did you go with shawn?

[MD323]

whatever jinx had on the escort, I lifted the whole front assembly off his hands when the escort went away

[Racerboy]

battery life is okay, it's usually good for the whole day (like four hour-long sessions?) but the batteries are expensive as ****. I have one of the older ones that only supports a 1gb (or 2? I forget) CF card, which is good for like 55 min of video or some **** like that.

ok. Thanks for the info! That battery life should be long enough. And if you can get 55 min out of even a 2 gb card, I'm guessing I'll be fine if I got a 16 or 32 gb card.

[atomicEGT]

so for anyone who is wondering about the power delivery with a Holset:

4th gear pull getting on the highway, had .3bar at 3k and 2.0bar at 4k, at which point things had gotten quite exciting.

since this is super unscientific and such, I'll still work on getting video.

[MazdaNoob]

so for anyone who is wondering about the power delivery with a Holset:

4th gear pull getting on the highway, had .3bar at 3k and 2.0bar at 4k, at which point things had gotten quite exciting.

since this is super unscientific and such, I'll still work on getting video.

/me shivvers

[Chad]

Here are a couple small clips of my 323 I recorded today with my hd hero2. It's kind of hard to really hear anything lots of wind. oh well.
Disregard the ugly plaid interior and how dirty the car is, after the accident i havent done anything to it other than drive it.
You can hear it cut out on me at 11-12 psi in the first clip
stupid y-code and gtx ecu.

[atomicEGT]

yo that plaid interior is pretty rad.

[miK3Pro]

Have you tried another vaf? Check for boost leak? Im running a gtx ecu with a U-code vaf with no cutoff at all

[Chad]

When I first did the plaid I had all Intentions on doing all the tan Parts Black but now Im looking for another car so it doesnt matter ha. but not really feelin the plaid much anymore.
As far as vaf's It came with a B code that the internals are all ****ed on so Couldnt really tune it , so I through my Y-code I had laying around.
It wouldnt suprise me one bit if I still had a boost leak, i have had no money to replace anything since my accident and the pipe going into my FMIC on the driver side is shaped like a D rather than O lol

[Mazda_Powered]

just drove 230 miles....worked it out to 43mpg!! awesome!

[FE3-323]

not freakin bad jack!

[MazdaNoob]

heh yeah it was windy as hell today .. he musta put a sail up

[Mazda_Powered]

it was really nice on my drive actually lol not much wind...just a lot of traffic :/

damn oil pan leaks by the downpipe, so when I stop quickly it will drip and smoke like a bitch haha, people must have been wondering "does he see the smoke? or does he just not care?"