Started to re-assemble my motor. Got the oil pickup tube on, baffle tray, and oil pan. Flipped it over to do the water pump and realized they sent the wrong pump. This time I'm going to order one from Mazda not advance auto parts. So I decided to work on my seats and got them all mounted. They look fairly nice but I need to shorten the wire that goes between the two adjustable rails.
-
Create your own VB Gallery here.
Please DONATE to keep our forum alive!
I've decided that my car is a girl, she's picky as hell, won't listen to me, always wants to fight me, and when i give her presents it's never good enough and she always wants more.
<-"Will be the death of this forum"
-
went and pulled the remaining parts for the ZX2's rear disk conversion yesterday (rear spindle/ttl combo), and I've just been working on dis-assembly, then get to install the new TTL bushings that'v been sitting around since '05 lol, I'm probably not getting the spindle bolt out, but I should be able to get the sway bar TTL off as it's only held on with a nut/washer. The other bushings look ok too which is nice, so I don't feel sketchy not changing them out.
Hopefully later today I get to do an oil change, and see if that tiny exhaust leak between the pre and post o2 is back...damn CEL is on again lol.-Jack
ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/
91 626 LX - basically stock and pretty slow still
http://www.clubprotege.com/forum/sho...my-GD-626-LX-)
01 E53 3.0i - FOR SALE!
pm if interested
91 USDM Protege LX - SOLD! turbo/manifold up for sale!
http://www.clubprotege.com/forum/showthread.php?t=46606Comment
-
Today I test fitted my GTR bumper on my parts car.Attached Files91 GT- Li'l Bee (under construction)
2013 Honda Accord V6 coupe - 14.7 sec. 1/4 mile
New Thread:
Wilyb's 91 Pro GT Rebuild: Li'l B: http://www.clubprotege.com/forum/sho...Rebuild-Li-l-B
Old Threads:
WilyB's 93 GT rebuild worklog : http://www.clubprotege.com/forum/sho...-93-GT-rebuild
My FE3 worklog thread:http://www.clubprotege.com/forum/sho...ighlight=wilyb
sigpicComment
-
-
But about 20oz of antifreeze in it. and drove it to Costco.
edit:stalker inspired pic.
Last edited by 93BlkOnGreenPro; 05-06-2012, 06:33 PM.My car is a Vazondissan. Part Nissan. Part Mazda. Part Ford. Part VW. Part Honda.
1993 Protege - DX with LX upgrades. Still rockin' the SOHC. Custom HID headlight Retrofit.
2009 Mazda 3 - Finacee Car. No power nothing. About to trade in for a 2014 Mazda 6 Sport.
Install Shifter Bushings: http://www.wihandyman.com/forum/show...491#post646491
Custom HID's: http://www.wihandyman.com/forum/show...&highlight=hidComment
-
Broke another fuxking axle. I'm so fed up with this... But I guess it's better than the tranny.Attached FilesComment
-
-
-
Or just not drive it anymore..Comment
-
Maybe try stronger axles? http://www.zxtuner.com/product.sc?pr...&categoryId=19
Expensive, but it might solve your issue.My family has lots of bg's!
2003 Ford Escort ZX2: Project car/future daily driver. Built Ford Tough (With Mazda Stuff)
1999 Escort ZX2: Daily driver/beater. Going to be replaced by the '03 next summer.
2000 Escort ZX2 S/R: bought wrecked, going to use as parts car
1992 Protege LX: My old race car. Just a wrecked shell right now. Waiting for scrap to go up so that I can get rid of it.
1992 Mazda 323: Race car
1992 Escort Gt: My grandpa's old race car
1994 Escort GT: My grandpa's new race car.
Parts cars; 1993 Escort Gt, 1995 Escort lxComment
-
You need to adjust your driving habit. I'm making more power than you, and I don't brake axles, and I'm on slicks. Or you need to buck up and go to the Kia 28 spline axles which are thicker.Originally posted by Ace View PostCreate your own VB Gallery here.
Please DONATE to keep our forum alive!
I've decided that my car is a girl, she's picky as hell, won't listen to me, always wants to fight me, and when i give her presents it's never good enough and she always wants more.
<-"Will be the death of this forum"
Comment
-
Originally posted by deadly_sleeper View Post
QFT
you know this by now ace, how many high power G series cars are down here making 300+?? troll around and youll see none of them break axles more than an oddball event. its all in the foot work"Discontent is the first necessity of progress."
-Thomas A. Edison
"There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."
*Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
*Junked* KLZE powered 323 on Megasquirt 1
172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
New Daily stock 1.6L 1999 Mazda Protege LXComment
-
Yeah, I'm well aware I'm not a pro at driving which is why I went to the middle of nowhere to tool around to try and improve my driving.Attached FilesComment
-
-
Originally posted by Ace View Post
Now why would you go and do sonething like that lolsigpicComment
-
How to not break axles, the atomic way: use questionable junkyard **** and a huge turbo.sigpic
03 Accord DX: K24/5MT, peasant-spec old man's car
92 240SX: KA/T25, nerd mobileComment
-
none of us are pro's but we all do it at the track where its safe as well as get feedback from the pros, thats why ive always loved moroso you get to pit next to 8 second cars and learn from them as well as learn from their critism"Discontent is the first necessity of progress."
-Thomas A. Edison
"There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."
*Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
*Junked* KLZE powered 323 on Megasquirt 1
172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
New Daily stock 1.6L 1999 Mazda Protege LXComment
-
Karma's a bitch and she lives under Ace's hood.
HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
Soon to be powered by a Precision snail on crack...
Add me on
more pictures of my projects can be found there.
Comment
Comment