Announcement

Collapse
No announcement yet.

Awd mp5

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by wgnths View Post
    that black on red just pops at you, im really digging that setup man.
    Funny how you mention the colors lol. I was just recently thinking of changing it up once I'm done getting the p5 swap finished. Now that the EGT is gone, I kind of dislike it The entire car however is getting matte blacked once I'm happy with it.


    Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
    HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
    Soon to be powered by a Precision snail on crack...

    Add me on more pictures of my projects can be found there.

    Comment


      Went out and bought a digital borescope to check on my rods to see if the bottom is indeed a GTR. Probably won't get dirty with that until tomorrow as I tried fishing it through my turbo oil drain. I couldn't get it past the MBSP due to the placement of the oil drain. Looks like I gotta drain my oil and go up that way with the hopes of getting it past the oil pick up tube..


      Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
      HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
      Soon to be powered by a Precision snail on crack...

      Add me on more pictures of my projects can be found there.

      Comment


        Either I'm getting sick or my allergies are going critical this week. So no work will be done to it until I'm feeling better.


        Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
        HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
        Soon to be powered by a Precision snail on crack...

        Add me on more pictures of my projects can be found there.

        Comment


          Originally posted by jinx View Post
          Went out and bought a digital borescope to check on my rods to see if the bottom is indeed a GTR. Probably won't get dirty with that until tomorrow as I tried fishing it through my turbo oil drain. I couldn't get it past the MBSP due to the placement of the oil drain. Looks like I gotta drain my oil and go up that way with the hopes of getting it past the oil pick up tube..
          going to try out a cheap borescope too,but to check out the piston crowns.my motor seems to be running pretty good and clean.but i really have no idear. if its nasty i may try out a motorvac.if its bad i think ive got some oil control problems.i don't/hope think it'll be too bad.

          Comment


            What did I go and do now???







            Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
            HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
            Soon to be powered by a Precision snail on crack...

            Add me on more pictures of my projects can be found there.

            Comment


              Turbo CX-7? Using turbo parts for the BP?

              Comment


                Originally posted by irishkev90 View Post
                Turbo CX-7? Using turbo parts for the BP?
                6spd auto and AWD too.


                Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
                HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
                Soon to be powered by a Precision snail on crack...

                Add me on more pictures of my projects can be found there.

                Comment


                  Is this your daily
                  sigpic

                  Comment


                    lower the cx raise the boost. piss off evo's
                    "Discontent is the first necessity of progress."
                    -Thomas A. Edison

                    "There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."


                    *Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
                    *Junked* KLZE powered 323 on Megasquirt 1
                    172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
                    New Daily stock 1.6L 1999 Mazda Protege LX

                    Comment


                      Originally posted by MD323 View Post
                      lower the cx raise the boost. piss off evo's

                      LOL doooo eeeetttt


                      Comment


                        cx-7 drivetrain into the p5?

                        S197 Mustang GT Convertible The New DD. (Ford Racing 3.73/JLT CAI/SCT SF3 Tuner/Ford Racing Exhaust)
                        2009 Nissan Rogue SL AWD Maximus Tractionous Wifeymobilious
                        Previous ~ 235whp 1.8 BP Powered 2003 MazdaSpeed Protege ~ - Sold

                        Comment


                          I have been tempted to trade my 2 in for a speed3 after the winter... lol
                          2011 BMW 128i 6 Speed Manual -- dd
                          1990 Protege 4WD 5 Speed

                          Comment


                            Originally posted by jinx View Post
                            What did I go and do now???
                            Just an oil change and light tune up for my moms new toy while it was in the area. She's always been a car person and has been in the Ford/Mazda club longer than myself :x In fact, it's her fault and the reason why I started liking BGs.. Tis where I got my first EGT from! Besides it being an automatic, I think she did a good job picking this one out on her own. She'd still be driving a manual if it wasn't for having a bad knee.. so I'll let that slide


                            Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
                            HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
                            Soon to be powered by a Precision snail on crack...

                            Add me on more pictures of my projects can be found there.

                            Comment


                              Finally got around to cleaning my carpet and scrubbing the floorboards clean. Big change in smell from the ambient odor that once was. Now it actually smells fresh **** was super skanky before.. I have so much little stuff left to get done with this thing Thinking about going for a fishing run tonight with the borescope, we'll see though.


                              Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
                              HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
                              Soon to be powered by a Precision snail on crack...

                              Add me on more pictures of my projects can be found there.

                              Comment


                                Early morning porn while digging through the mess of a p5 that's in the garage. Enjoy!



                                Flyrtle 6.0 Dynojet @ 15psi on BP26 ECU 229.31 whp / 229.95 ft-lb
                                HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
                                Soon to be powered by a Precision snail on crack...

                                Add me on more pictures of my projects can be found there.

                                Comment

                                Working...
                                X